Initialize the Fax Driver

Configuring the optional environment of this machine

If you are using this machine for the first time, apply the optional device installation and authentication settings to the fax driver.

1. Open the [Properties] screen of the fax driver.

   For information on how to display the [Properties] window, refer to [How to display the Properties window] .

2. Open the [Configure] tab, and check the optional device installation and authentication settings on this machine.

   By default, [Auto] in [Obtain Settings...] is enabled. The information on this machine is automatically obtained and reflected to [Device Option].
   If the [Auto] in [Obtain Settings...] is disabled, clicking [Obtain Device Information], the current information of this machine is obtained and reflected on [Device Option].

   

3. Click [OK].

Change the default print settings

You can change the default print settings of the fax driver if necessary.

For example, if you set to send the initial value with page combination, you can reduce the number of pages printed at the destination. We recommend that you change the default settings to suit your environment.

1. Open the [Printing Preferences] screen of the fax driver.

   For details on how to open the [Printing Preferences] screen, refer to [The following explains the Printing Preferences screen.] .

2. Change the print settings, then click [OK].

   All the changes you made will be applied when executing PC-Fax TX using any type of application software.

Reference

• The fax driver has the function to save favorite settings. For details, refer to [Call the Frequently Used Settings] .