Optional Components

1

Main unit

Scans the original in the scanner section, and prints a scanned image in the printer section.

This unit is referred to as "this machine" or "the main unit" in the manual.

2

Original Cover OC-513

Used to fix the loaded originals.

This is referred to as Original Cover in the manual.

3

Reverse Automatic Document Feeder DF-633

Automatically feeds and scans originals by page. This unit also reverses and automatically scans 2-sided originals.

This unit is referred to as ADF in the manual.

4

FAX Kit FK-513

Used to operate this machine as a fax machine.

5

Clean Unit CU-101

Collects small particles (UFP) generated in this machine to prevent them from escaping this machine.

The Mount Kit MK-748 is required to install Clean Unit CU-101.

6

Mount Kit MK-748

This unit is required to install Clean Unit CU-101.

7

Authentication Unit AU-102

Performs user authentication by scanning vein patterns in the finger.

The Working Table WT-515 is required to install the Authentication Unit AU-102.

To install, the Local Interface Kit EK-608 or Local Interface Kit EK-609 is required.

This unit is referred to as Biometric Authentication Unit in the manual.

8

Authentication Unit AU-201S

Performs user authentication by scanning information recorded on the IC card or NFC-compatible Android terminal.

The Mount Kit MK-735 is required to install the Authentication Unit AU-201S. This unit can also be installed on the Working Table WT-515.

To install, the Local Interface Kit EK-608 or Local Interface Kit EK-609 is required.

This unit is referred to as IC Card Authentication Unit in the manual.

9

Working Table WT-515

This is used when the Authentication Unit AU-102 or Authentication Unit AU-201S is installed.

10

Keypad KP-101

It is equipped on the side of the Control Panel.

Allows you to operate this machine or enter a number by using hardware keys.

11

Desk DK-518

Used to install this machine on the floor.

This unit is referred to as Desk in the manual.

12

Paper Feed Cabinet PC-418

Allows you to load up to 2500 sheets of 8-1/2 11 (A4) size.

This unit is referred to as LCT (built-in) in the manual.

13

Paper Feed Cabinet PC-218

Allows you to load up to 500 sheets respectively in the top and bottom trays.

This unit is referred to as Double Paper Feed Cabinet in the manual.

14

Paper Feed Cabinet PC-118

Allows you to load up to 500 sheets in the top tray and use the bottom tray as a storage box.

This unit is referred to as Single Paper Feed Cabinet in the manual.

15

Finisher FS-539

Sorts, groups and staples printed paper before outputting it.

To install the Finisher FS-539, the Relay Unit RU-514 and Mount Kit MK-603 are required. In addition, the Paper Feed Cabinet PC-118, PC-218, or PC-418 or Desk DK-518 must be installed on this machine.

16

Finisher FS-539 SD

Sorts, groups, staples, folds, and binds printed paper before outputting it.

To install the Finisher FS-539 SD, the Relay Unit RU-514 and Mount Kit MK-603 are required. In addition, the Paper Feed Cabinet PC-118, PC-218, or PC-418 or Desk DK-518 must be installed on this machine.

17

Punch Kit PK-524

Install this unit onto the Finisher FS-539/FS-539 SD.

This unit supports the punching function.

18

Relay Unit RU-514

This unit is required to install the Finisher FS-539/FS-539 SD on this machine.

19

Finisher FS-533

Install this unit onto the output tray of this machine.

Sorts, groups and staples printed paper before outputting it.

The Mount Kit MK-602 and Mount Kit MK-603 are required to install Finisher FS-533.

20

Mount Kit MK-602

This unit is required to install the Finisher FS-533.

21

Punch Kit PK-519

Install this unit onto the Finisher FS-533.

This unit supports the punching function.

22

Job Separator JS-506

Install this unit onto the output tray of this machine.

This unit sorts printed sheets.

The Mount Kit MK-603 is required to install Job Separator JS-506.

23

Mount Kit MK-603

This unit is required to install the Finisher FS-539/FS-539 SD/FS-533 or Job Separator JS-506 on this machine.

1

Local Interface Kit EK-608

Install this unit when using the voice guidance function.

This is also required when the Authentication Unit AU-102 or Authentication Unit AU-201S is used.

The speaker and USB port are added.

This unit is referred to as the Local Interface Kit in the manual.

2

Local Interface Kit EK-609

Install this unit when using the voice guidance function or the connection function with a Bluetooth LE-compatible iOS terminal.

This is also required when the Authentication Unit AU-102 or Authentication Unit AU-201S is used.

The speaker, USB port, and receiving device for Bluetooth LE communication are added.

This unit is referred to as Local Interface Kit or Local Interface Kit (voice guidance / Bluetooth LE compatible) in the manual.

3

i-Option LK-102

Allows you to add the PDF processing function.

4

i-Option LK-104

Allows you to add the voice guidance function.

5

i-Option LK-105

Allows you to add the searchable PDF function.

6

i-Option LK-106

Used to add a bar code font that is one of special fonts.

7

i-Option LK-107

Used to add a unicode font that is one of special fonts.

8

i-Option LK-108

Used to add an OCR font that is one of special fonts.

In the standard, the OCR-B font (PostScript) is available. Installing this option allows a use of the OCR-A font (PCL).

9

i-Option LK-110

Allows you to convert a file into the DOCX or XLSX type or generate a high functionality and the high-quality data generation function.

This option includes the function licenses for i-Option LK-102 and i-Option LK-105. To purchase this option, you do not need to purchase i-Option LK-102 and i-Option LK-105.

For details about functions able to be added, refer to [Types of Advanced Options] .

10

i-Option LK-111

Allows you to add the ThinPrint function.

11

i-Option LK-114

Allows you to add the serverless pull printing function.

12

i-Option LK-115

Allows you to add TPM (Trusted Platform Module). Security enhancement is realized by encrypting confidential information such as certificates and passwords of this machine.

13

i-Option LK-116

Allows you to add the virus scan function.

14

i-Option LK-117

Allows you to add the IP fax (SIP) function.

15

Upgrade Kit UK-221

Allows you to use this machine in a wireless network environment.

This unit is referred to as the Wireless LAN Interface Kit in the manual.

16

Heater HT-509

Prevents paper in a paper tray from being affected by humidity.

The Heater HT-509 for paper feed cabinet can be mounted when you purchase the Paper Feed Cabinet PC-118, PC-218, or PC-418.

17

Power Supply BOX MK-734

Used to turn on or off the operation of Heater HT-509 for paper feed cabinet.

The Power Supply BOX MK-734 can be mounted when you purchase the Paper Feed Cabinet PC-118, PC-218, or PC-418 or Desk DK-518.

18

Mount Kit MK-735

Required to have Authentication Unit AU-201S built in to the main unit.

1

LCT (built-in)

Allows you to load up to 2500 sheets of plain paper.

For details on the available paper, refer to [Paper] .

2

Bottom Right Door

Open this door when clearing a paper jam in the Tray 3 or Tray 4 transport unit.

3

Bottom Right Door Release Lever

Used to lock the Bottom Right Door.

4

Tray 3

Allows you to load up to 500 sheets of plain paper.

For details on the available paper, refer to [Paper] .

5

Tray 4/Storage Box

Used as a Storage Box when installing Single Paper Feed Cabinet.

This box allows you to load up to 500 sheets of plain paper when Double Paper Feed Cabinet is installed.

For details on the available paper, refer to [Paper] .

1

Jack for connecting a telephone (TEL PORT1)

Used to connect a telephone cord.

2

Telephone Jack 1 (LINE PORT1)

Used to connect a general telephone subscriber line.

3

Heater Power Switch

Used to turn on or off the operation of Heater for paper feed cabinet. This function prevents paper from being affected by humidity when the power is turned on.