Configuring Reset Operations (For Administrators)

To change the time required to reset the system and the mode to be displayed after resetting ([System Auto Reset])

To display:

[Utility]
- [Administrator Settings]
  - [System Settings]
    - [Reset Settings]
      - [System Auto Reset]

Select whether to reset all settings (except registered settings) when this machine has not been operated for a certain period of time.

Settings	Description
[Priority Mode]	Select a function that is to be displayed in preference after the settings have been reset. [Main Menu] is specified by default.
[System Auto Reset Time]	Enter the amount of time that elapses until the selected function is reset. If you choose not to reset the settings, select [OFF]. [1] min. is specified by default (allowable range: [1] to [9] min.).

Settings

Description

[Priority Mode]

Select a function that is to be displayed in preference after the settings have been reset.

[Main Menu] is specified by default.

[System Auto Reset Time]

Enter the amount of time that elapses until the selected function is reset.

If you choose not to reset the settings, select [OFF].

[1] min. is specified by default (allowable range: [1] to [9] min.).

Log out of the Administrator Setting or User Authentication/Account Track mode according to the time setting for [System Auto Reset Time] when user authentication/account track is active or the [Enhanced Security Mode] is enabled. If [OFF] is selected, you will be logged out after one minute.

To change the time required to reset the currently updated settings ([Auto Reset])

To display:

[Utility]
- [Administrator Settings]
  - [System Settings]
    - [Reset Settings]
      - [Auto Reset]

Select whether to reset all settings (except registered settings) for each of Copy, Fax/Scan, Fax, User Box, and Web browser functions when this machine has not been operated for a certain period of time.

To reset them, set the amount of time that elapses before the settings are reset.

[1] min. is specified by default.

To reset condition settings when changing users or loading an original into the ADF ([Job Reset])

To display:

[Utility]
- [Administrator Settings]
  - [System Settings]
    - [Reset Settings]
      - [Job Reset]

Select whether to reset settings for the conditions that are applied when changing users or loading a document into the ADF.

Settings	Description
[When Account is changed]	Select whether to initialize all settings (except registered settings) when the key counter or management card is removed. [Reset] is specified by default.
[When original is set on ADF]	Select whether to reset all settings (except registered settings) when document is loaded into the ADF. [Do Not Reset] is specified by default.
[Next Job]	Select whether to reset Staple Setting, Original Set/Bind Direction settings, and TX Settings for each job. [Staple Setting]: Select whether or not to take over the settings upon completion of a job for which Staple has been specified. [OFF] is specified by default. [Original Set/Bind Direction]: Select whether or not to take over the settings upon completion of a job for which Original Set and Bind Direction have been specified. [OFF] is specified by default. [Reset Data After Job]: Select whether to clear all settings or only destinations when resetting for each job in Scan/Fax TX Settings. If you select [Confirm with User], a confirmation screen appears to check with you if settings or destinations are to be cleared. [Reset All] is specified by default.
[Default Basic/Enlarge Display Common Setting]	Select whether to configure the initial values for Normal and Enlarge Display mode at the same time. If [Apply to all] is selected, [Default Enlarge Display Settings] does not appear. Initial values for each mode that are changed in [Default Copy Settings] or [Default Scan/Fax Settings] are applied to both Normal and Enlarge Display modes. [Do not Apply] is specified by default.