Operations Required to Use This Function
Checking a LAN cable for connection
Check that a LAN cable connected to the network is connected to the LAN port of this machine. For details on the cable connection port, refer to [Rear side] .
Checking the network settings
Ensure that this machine has an IP address assigned to it. Tap [Utility] - [Device Information], and check that an IP address is displayed.
Reference
If no IP address is displayed, you need to set up the network. For details, refer to [Configuring network environment settings] .
Configuring the environment to send data via a scan server
Enable the Distributed Scan function.
How to configure the setting is explained using Web Connection. For details, refer to [Associating with the distributed scan server] .