Overview of 2-Sided Printing (2 in 1 + 2-Sided)

Impose an A4-size PDF document with 32 pages on A4 papers by 2 in 1 (reduced size), and then print with 2-sided.

In this section, you can check how to finish the printed document while actually operating with sample data (sample A).

• Example Introduced in This Section

•Intended Environment

* The sample screen may be different from the actual display depending on your system environment and application version/revision.

•Samples

Sample A: A_sample.pdf
Provided in the "/contents/sample/" folder on the User's Guide CD supplied with this machine.

•Workflow

•Recommended Combination

Stamp: You can insert Date/Time, Page Number and Copy Number in each page at the time of printing. (Stamp tab of the printer driver. Refer to [Stamp] Screen.)
1-sided or 2-sided print on a page basis: You can set 1-sided or 2-sided print for each page. (Page Settings tab of the printer driver. Refer to [Page Settings] Screen.)

•Precautions

Prior to printing, make sure of the following when performing setting and operation.
Load the papers and configure the paper settings (refer to Setting Paper in a Paper Tray / [Paper Setting] / Setting and Registering Paper on the Change Individual Set Screen)
To reproduce stable colors, in addition to regular calibration, make other pre-output image quality adjustments as necessary, such as when changing screens or papers or when hue is important. For details, refer to Image Quality Adjustment Using Image Controller.
To adjust the image positions of front and back sides of printing, make pre-output image quality adjustments. For details, refer to Both-Side Adjustment Flow.
If you cannot set this function, make sure that the optional device has been correctly mounted.
Match the original orientation and the orientation of the paper in the paper tray.

Menu