Name

AccurioPress C84hc

Type

Console type

Color compatibility

Full color

Print method

4 drum tandem laser electrostatic copying system

Photoconductor

OPC

Development method

Dry 2-component

Transfer type

Belt transfer/roller transfer

Fusing method

Belt fixed

Gradation/Expression color

256 gradations (8-bit) / 16.7 million color

Paper weight (Main body tray)

Plain, Fine, Color Specific, Textured: 62 g/m² to 256 g/m²* / 16 lb Bond to 68 lb Bond*

Coated-G, Coated-M: 81 g/m² to 256 g/m²* / 22 lb Bond to 68 lb Bond*

*: 217 g/m² to 256 g/m² / 58 lb Bond to 68 lb Bond settings are only for A4 v or 8.5 e 11 v or higher paper.

Paper size (Main body tray)

• Tray 1 (Upper tray)

Standard: A3 w, B4 w, SRA4 w/v*, A4 w/v, B5 w/v, A5 w, 11 e 17 w, 9 e 11 v, 8.5 e 14 w, 8.5 e 11 w/v, 5.5 e 8.5 w, 8 e 13 w, 8K w, 16K w/v

Custom: Widthwise 139.7 mm to 330.2 mm, lengthwise 182 mm to 431.8 mm / Widthwise 5.5" to 13", lengthwise 7.17" to 17"

Tab paper: A4T v, 8.5 e 11T v

• Tray 2 (Lower tray)

Standard: SRA3 w, A3 w, B4 w, SRA4 w/v*, A4 w/v, B5 w/v, A5 w, 13 e 19 w, 12 e 18 w, 11 e 17 w, 9 e 11 v, 8.5 e 14 w, 8.5 e 11 w/v, 5.5 e 8.5 w, 8 e 13 w, 8K w, 16K w/v

Custom: Widthwise 139.7 mm to 330.2 mm, lengthwise 182 mm to 487.7 mm / Widthwise 5.5" to 13", lengthwise 7.17" to 19.20"

Tab paper: A4T v, 8.5 e 11T v

*: In Japan and metric area only

Series B paper is set to JIS or ISO standard size by default. This setting differs depending on the shipping region. For JIS/ISO switching, contact your service representative.

Detectable fixed sizes can be changed. Furthermore, use of K size can be selected on the [Utility] screen, and K size can be detected. For details, refer to [K Size].

Feed capacity (Main body tray)

Tray 1 (upper tray): 500 sheets (80 g/m² / 21 lb Bond)

Tray 2 (lower tray): 1,000 sheets (80 g/m² / 21 lb Bond)

Feedable paper sizes for the machine

Straight output/Duplex

Standard: SRA3 w, A3 w, B4 w, SRA4 w/v, A4 w/v, B5 w/v, A5 w/v, B6 w, A6 w, Postcard w*, 13 e 19 w, 12 e 18 w, 11 e 17 w, 9 e 11 v, 8.5 e 14 w, 8.5 e 11 w/v, 5.5 e 8.5 w, 8.5 e 13 w, 8.25 e 13 w, 8.12 e 13.25 w, 8 e 13 w, 8K w, 16K w/v

Custom:

• Straight output
  Widthwise 100 mm to 330.2 mm, lengthwise 148 mm to 1,300 mm / Widthwise 3.94" to 13", lengthwise 5.83" to 51.18"

• Duplex
  Widthwise 100 mm to 330.2 mm, lengthwise 148 mm to 864 mm / Widthwise 3.94" to 13", lengthwise 5.83" to 34.02"

Tab paper (single side only): A4T v, 8.5 e 11T v

*: Only in Japan.

Back on Top Output

Standard: SRA3 w, A3 w, B4 w, SRA4 w/v, A4 w/v, B5 w/v, A5 w, 13 e 19 w, 12 e 18 w, 11 e 17 w, 9 e 11 v, 8.5 e 14 w, 8.5 e 11 w/v, 5.5 e 8.5 w, 8.5 e 13 w, 8.25 e 13 w, 8.12 e 13.25 w, 8 e 13 w, 8K w, 16K w/v

Custom: Widthwise 139.7 mm to 330.2 mm, lengthwise 182 mm to 487.7 mm / Widthwise 5.5" to 13", lengthwise 7.17" to 19.2"

Tab paper: A4T v, 8.5 e 11T v

Allowed weight for machine feed

Back on Top Output, Duplex: 62 g/m² to 360 g/m^2* / 16 lb Bond to 95 lb Bond^*

*: 301 g/m² to 360 g/m² / 82 lb Bond to 95 lb Bond is available only for A3 w to SRA3 w.

Printing speed

Monochrome/color:

81 sides/min. (A4 v), 80 sides/min. (8.5 e 11 v)

Warm-up time

6 minutes 30 seconds or less (23°C, 50%RH, rated voltage when electric current is running through)

Power

In Japan: Single-phase AC 200 V / 25 A, 50/60 Hz

Metric area: AC 220 V to 240 V / 25 A, 50/60 Hz

Inch area: AC 208 V to 240 V / 24 A, 60 Hz

Australia and New Zealand: AC 220 V to 240 V / 20 A, 50/60 Hz

Maximum power consumption

In Japan: 5,000 W

Metric area: 6,000 W

Inch area: 5,760 W

Australia and New Zealand: 4,800 W

*Device system values besides the options that use dedicated power cords

Weight

305 kg / 672.41 lb (machine only)

Dimensions

800 mm (W) ^*1 e 903 mm (D) ^*2 e 1,041 mm (H) ^*3 / 31.5" (W) ^*1 e 35.55" (D) ^*2 e 40.98" (H) (Machine) ^*3

*1: Excluding operating parts, output tray and working table.

*2: Including rear duct.

*3: Excluding operating parts.

Machine occupied dimensions

5,192 mm (W) ^*1 e 1,734 mm (D)^*2 / 204.41" (W)^*1 e 68.27" (D)^*2

(Machine + Paper Feed Unit PF-707m + Relay Unit RU-518m + Relay Unit RU-510 + FoldingUnit FD-503 + SaddleStitcher SD-506 + Finisher FS-532)

*1: When the Finisher FS-532 main tray is pulled out

*2: Ensure space of 631 mm / 24.84" in front of the machine (when Fusing Conveyance Unit is pulled out), and 200 mm / 7.87" from the back duct on the back side.

Usage environment

10 °C to 30 °C

10%RH to 80%RH

Image controller function

Built-in image controller

Write resolution

Main scanning: equivalent to 3,600 dpi

Sub scanning: 2,400 dpi

Memory capacity

HDD: 1 TB e 2

Memory: 16 GB

Internal font (PS)

• European languages: 136 typefaces

Internal font (PCL)

• European languages: 80 typefaces (Agfa MicroType), 36 typefaces (Symbolset)

Page description language

• Adobe PostScript3 (CPSI3020)

• PDF Direct printing (PDF Ver. 1.7)

• TIFF Direct printing (TIFF Ver. 6 standard)

• PPML (Ver.2.2)

• APPE (Ver.5.6)*: PDF1.3 to 2.0, PDF/X-1a, PDF/X-3, PDF/X-4, PDF/VT-2

• PCL 5C compatible

• PCL XL (PCL6 Ver. 3) compatible

*: Only supported when Upgrade Kit UK-220 is mounted.

Image controller function

External print server

Memory capacity

HDD: 1 TB

RAM memory: 8 GB (2 e 4 GB)

Internal font

• European languages: 138 typefaces

Page description language

• Adobe PostScript3 (CPSI3020)

• PDF Direct printing (PDF Ver. 2.0)

• PPML (Ver.3.0)

• APPE (Ver.6.0)

Image controller function

External print server

Memory capacity

HDD: 500 GB

Memory: 8 GB (2 e 4 GB)

Internal font

European languages: 138 typefaces

Page description language

• Adobe PostScript3 (CPSI3020)

• PDF Direct printing (PDF Ver. 2.0)

• APPE (Ver.6.0)