[Cover Print Mode]^*1*2

Set the cover printing method for perfect binding.

For details about the printing method, refer to How to Print Perfect Binding Covers.

• Select the [Glossy] check box to gloss prints.

[Cover Trim]^*3

Configure the setting to trim both cover edges for perfect binding.

[Spine Width]^*4

Set the width of the spine.

• Range: 1.0 mm to 30.0 mm / 0.04" to 1.18"

[Cover 2-Sided]^*5

Configure the setting to perform 2-sided printing for perfect binding covers.

[Cover Tray]^*3

Set the paper tray used for perfect binding covers.

[Cover Size]*3

Paper size list

Set the paper size used for perfect binding covers.

To manually set the paper size, click [Custom Size...].

[Custom Size...]

[Paper Profile]^*3

Select the paper profile for cover printing from the menu list.

This option can be set to the paper profile registered in this system.

[Cover Crease]^*3*6

[Off]

Crease perfect binding covers.

Creasing prevents cover toner peeling, or facilitates turning over the page of the bound book.

[Spine]

[Gutter]

[Spine + Gutter]

[Cover 2-Side Slitting]^*3*7

Configure settings for cover slitting.

This function allows you to slit both the upper and lower edges in the paper feed direction.

[Top Slitting]^*8

Set the slitting amount at the top of the cover in the paper feed direction.

• Range: 8.0 mm to 26.0 mm / 0.31" to 1.02"

[Bottom Slitting]^*8

Set the slitting amount at the bottom of the cover in the paper feed direction.

• Range: 8.0 mm to 26.0 mm / 0.31" to 1.02"

[Lead Edge Adjustment]^*3

Set the horizontal position (conveyance direction) of the front cover and body.

• Range: -20.0 mm to +5.0 mm / -0.78" to +0.19"

[Trimming Adjustment]^*3

Set the amount to trim the perfect binding covers.

• Range: -5.0 mm to +5.0 mm / -0.19" to +0.19"

[Image Shift]

[Off]

Set the side to adjust the target image position.

[Shift Front/Back Evenly]

[Shift Front/Back Separately]

[Right]^*5

Sets the position of the image to print on the cover.

• For the horizontal direction, entering a positive value shifts an image to the right, and entering a negative value shifts an image to the left.

• For the vertical direction, entering a positive value shifts an image down, and entering a negative value shifts an image up.

• Range: -10.0mm to +10.0mm / -0.39" to +0.39"

[Bottom]^*5

[Right (Back Side)]^*5

[Bottom (Back Side)]^*5

[Cover Blank]

[Cover Print 2 in 1]

[Cover Print 3 in 1]