Home ScanSettings Required to Use Scan to E-mail

Settings Required to Use Scan to E-mail

Press [Input Address] and [Option Setting] on the [SCAN] screen before setting.

Address

Input an address manually or select a registered address. You can specify multiple addresses.

For details, refer to Registering an E-mail Address as a Destination.

Register Name

Enter a name of a destination.

If you register the name, it is displayed on the destination list.

Reference Name

Enter text to search for a destination.

If you register the text, you can use it to search for the destination.

Title Setting

Set an E-mail subject.

Input a subject manually or select a registered subject.

For details, refer to Registering a Subject and a Message of E-mail.

Text Setting

Set an E-mail text.

Input a text manually or select a registered text.

For details, refer to Registering a Subject and a Message of E-mail.

From Address Setting

Set the sender's address.

Input an address manually or select a registered address.

For details, refer to Registering an E-mail Address as a Destination.

  • To send to an E-mail address, set the administrator's E-mail address in advance.
    For details, refer to Administrator Registration: Registering Administrator Information.

  • You can set the maximum size of an attachment file (1000 KB by default) in Scan Setting. Depending on the setting, the scan data may be saved to the HDD, instead of being attached to the E-mail. In such a case, a notification E-mail is sent to the address. The scan data can be downloaded by accessing the URL specified on the E-mail within the specified time period.

  • If the network or the SMTP server has any problem, the E-mail may not reach a recipient.
    When sending an important E-mail, be sure to check whether the recipient has received it.
    For details, contact your administrator.