Application

Configure any [Application] setting to scan data.

Pressing [All OFF] turns all application functions off.

[Book Copy]
[Orig. Bind Direction]: [Left Bind], [Right Bind]
[Cover Put Select]: [No Cover], [Front With Cover], [Front/Back With Cover ]
In scan mode, [Booklet] cannot be selected in [Additional Function].

[No Image Area Erase]

[Frame Center Erase]
[Function Selection]: [Erase/All Sides], [Erase/Each Side], [Center Erase]

[Erase Width Setting]
When [Erase/All Sides] is selected: Specify [Top], [Bottom], [Right], and [Left] between 1 mm and 300 mm to set all the widths to be erased.
When [Erase/Each Side] is selected: Specify [Top], [Bottom], [Right], and [Left] between 1 mm and 300 mm to set each width to be erased.
When [Center Erase] is selected: Specify the width to be erased between 1 mm and 99 mm.

[Full Image Area]

[OK]
Applies the setting.

[Cancel]
Cancels the setting.

[All OFF]
Turns the function of the selected setting off when [All OFF] is pressed on the individual setting screen.