User's Guide

Home > Administrator Setting > [System Setting] > [Process Adjustment] > [Front & Back Density]

[Front & Back Density]

Overview
Setting Procedure

Overview

Set the transfer output voltages when outputting.

If an uneven density occurs when the transfer output voltage is automatically corrected in general use, manually adjust the correction value.

Setting Procedure

1
Press the key for the item to be adjusted.
2
Use the on-screen keypad or the Keypad of the Control panel to enter the numeric value.

  • Use [+ / -] to select the plus or minus of the numeric value. To change [Current Data], press [Set].

  • [Adj.Range:-30~+30%]

  • Keypad: Enter the numeric value.

  • [+ / -]: Sets the plus or minus of the numeric value.

  • [Clear]: Returns the entered numeric value to "0".

Was this information useful?