Major Functions of this Machine

Print

This machine can be used as a printing system by mounting an optional image controller on the machine.

A print can be made on this machine from the application software installed on your computer via the printer driver.

When printing, you can configure a layout setting or finishing setting by following an easy procedure.

For details, refer to About Print Function.

Copy

When you are using ineo+ 3080, ineo+ 3070, or ineo+ 3070L, you can specify conditions such as original scan setting, paper size setting, and finishing setting to make a copy.

For details, refer to Overview of Copy.

Scan

When you are using ineo+ 3080, ineo+ 3070, or ineo+ 3070L, you can send an E-mail with scanned-data attached, send data to the shared computer (SMB server), FTP server, or WebDAV server, and save data in the USB flash drive mounted on the machine.

For details, refer to Overview of Scan Function.

Job Store

The printed, copied, or scanned job can be stored on the machine’s HDD. The stored job can be re-printed or edited.

For details, refer to What is Job Management?.

Available Functions with Options Mounted

This machine allows you to use various functions by mounting options.
Check the options compatible with the desired functions, referring to the table below.

Function	Option
Simultaneous dual scan	Dual Scan Document Feeder DF-706 (ADF)
Staple	Finisher FS-531 Finisher FS-612 Finisher FS-532
Punch	Finisher FS-531 + Punch Kit PK-512 or Punch Kit PK-513 Finisher FS-612 + Punch Kit PK-512 or Punch Kit PK-513 Finisher FS-532 + Punch Kit PK-522 Folding Unit FD-503 Multi Punch GP-501
Fold&Staple	Finisher FS-612 Finisher FS-532 + Saddle Stitcher SD-510 Saddle Stitcher SD-506 Saddle Stitcher SD-513
Multi Half-Fold	Finisher FS-612 Finisher FS-532 + Saddle Stitcher SD-510 Saddle Stitcher SD-506 Saddle Stitcher SD-513
Tri-Fold-In	Finisher FS-612 Saddle Stitcher SD-506
Multi Tri-Fold	Finisher FS-532 + Saddle Stitcher SD-510 Saddle Stitcher SD-506 Saddle Stitcher SD-513
Z-Fold	Folding Unit FD-503
Tri-Fold-in
Tri-Fold-out
Double Parallel
Gate
Half-Fold
Inserting Cover Paper	Finisher FS-531 + Post Inserter PI-502 Finisher FS-612 + Post Inserter PI-502 Finisher FS-532 + Post Inserter PI-502 Folding Unit FD-503
Fore-Edge Trimming	Saddle Stitcher SD-506 Saddle Stitcher SD-513
Creasing Paper	Saddle Stitcher SD-513 + Creaser Unit CR-101
2-Side Slitting	Saddle Stitcher SD-513 + Trimmer Unit TU-503
Spine Corner Forming in Fold & Staple	Saddle Stitcher SD-513 + Folding Unit FD-504
Perfect Binding	Perfect Binder PB-503
Banner printing	Banner Tray Unit MK-740 Output tray reinforcing unit for banner MK-740m Large Capacity Unit LU-202XL Large Capacity Unit LU-202XLm
Measuring the image density on paper for adjustment purposes Correcting paper curl	Relay Unit RU-518
Automatically adjusting the image quality and image position during printing	Integrated Color Care Unit IQ-501
Judging an image that does not satisfy the standard (Automatic Inspection)	Integrated Color Care Unit IQ-501 + Relay Unit RU-702 + Auto Inspection Unit UK-301
IC Card Authentication	Authentication Unit AU-201S
Ring bind	Auto Ring Binder GP-502