HomeNetwork FaxHow to Send a Fax

How to Send a Fax

  1. Load the original.

  2. Tap [Scan/Fax].

  3. Specify the destination E-mail address.

    • For details on how to specify a destination, refer to Here.

    • Specify more than one destination to concurrently perform transmission to a computer and fax transmission, etc.

    • If necessary, you can change the display of the main screen in fax/scan mode (default: [Address Book]). For details, refer to Here.

  4. Configure the option settings for fax transmission as necessary.

    • For details on configuring option settings, refer to the respective columns of the following table.



    To configure basic options such as color and original size


    To configure options to scan various types of originals such as various sizes and books


    To adjust the image quality level of the original such as colored background (newspaper, etc.) or light printing original


    To print date/time and page number


    Other option settings


  5. Press the Start key.

    • Tap [Check Setting] before sending, and check the destination and settings as necessary.

    • To redo operations for specifying destinations or option settings, press the Reset key.

    Transmission begins.

    • If you press the Stop key while scanning an original, the scanning process stops, and a list of stopped jobs appears. To cancel scanning of the original, delete the job from the list of inactive jobs.

  • When an Internet fax is sent, the TX result report is printed. With the TX result report, you can check for successful fax transmission.

  • When the recipient machine receives an Internet fax, an MDN message that provides notification of successful reception is printed on this machine. You can check whether the fax has been successfully received by reading the MDN message.

  • You can change the default options for scan transmission to suit your environment. For details, refer to Here.