Printer Status

The status of this system is displayed by the icon or message at the bottom right of the screen.

The following contents are displayed.

[Ready]: This system is normal.

[Service Call]: A service call has occurred in this system or the Image Controller.

[Cover Open]: One of the doors of this system is open.

[Paper Jam]: A paper jam has occurred in a location other than the ADF. Follow the instructions shown on the Touch panel of this system to clear the paper jam.

[ADF Cover Open]: ADF is opened.

[ADF Jam]: A paper jam has occurred in the ADF.

[Output Tray Full]: One of the output trays is full.

[Toner Empty]: One of the toner cartridges is empty.

[Humidifier Tank Empty]: The humidifier tank is empty.

[Key Counter Unset]: The key counter is not set.

[No Cyclone Box]: Cyclone Box is not set.

[Low Power Mode]: This system is in Low power mode.

[Shut OFF Mode]: This system is in Shut-Off mode.

[Warming Up]: This system or the perfect binding option is in Warming-Up mode.

[Now Adjusting]: This system is adjusting.

[Out of Range Detected]: An invalid image was detected during automatic inspection.

[Error]: A print job has stopped for some reason.

[Print Paused]: A print job has been temporarily stopped by the user.

[Print Hold by Warning]: A print job has been temporarily stopped for some reason.

[Printing]: A print job is currently being printed.

[Canceling]: A print job is currently being canceled.

: Indicates a warning.

: Indicates an error.

Tips

• The displayed items vary depending on the optional devices mounted on this system.