In order to send the scan data to the FTP server, the following items need to be set.
Enter a name of a destination.
If you register the name, it is displayed on the destination list.
Enter text to search for a destination.
If you register the text, you can use it to search for the destination.
You can specify an FTP server name or an IP Address of the FTP server.
You specify a directory in the FTP server.
You specify a Login Name for the FTP server.
You specify a corresponding Password to each Login Name for the FTP server.
You can specify a Port No. when necessary.
You can register a Register Name, Reference Name, Host Address, File Path, Login Name, Password, and Port No. beforehand. For details, refer to Registering an FTP Server as a Destination.
Be sure to check that the scan data are not damaged.
If the data are damaged, check the network.
Depending on a network condition, the scan data may be damaged.
For details, contact your administrator.
Controller NIC Setting Menu: Configuring the Network Information of the Controller