Post Inserter Operations
Keys on the Control Panel
When Post Inserter PI-507 is installed on Finisher FS-540/FS-540 SD, you can manually operate Finisher FS-540/FS-540 SD using the Post Inserter Control Panel.
No. | Name | Description |
|---|---|---|
1 | Corner Staple Lamp | Indicates that Corner Staple is selected. |
2 | Center Staple & Fold Lamp | Indicates that Center Staple and Fold is selected. |
3 | Finishing | Press this key to select the finishing. |
4 | 2-Hole Lamp | Indicates that 2-Hole is selected. |
5 | 3-Hole Lamp | Indicates that 3-Hole is selected. |
6 | Select punch | Press this key to select the number of punch holes. |
7 | Start/stop | Press this key to start the post inserter operation. To stop the operation, press this key during operation. |
8 | 4-Hole Lamp | Indicates that 4-Hole is selected. |
9 | Tri-Fold Lamp | Indicates that Tri-Fold is selected. |
10 | 2 position staple lamp | Indicates that 2-position staple is selected. |
Using the Post Inserter for finishing
Only the Lower Tray can be used as the paper tray. The Upper Tray is not available for use.
1
Load paper into the Lower Tray of Post Inserter, then align the lateral guide with the paper size.
Load so that the top (upper side) of the paper is on the back side.
To use the corner staple or 2-staple option, load the paper face up.
To perform Punch, load the paper face up.
To perform Bind, load the front side of the bound paper face down.
To perform Tri-Fold, load the outside of the tri-folded paper face down.
If the paper to be loaded is curled significantly, flatten the paper before loading it. Doing so may cause a paper jam or damage to the machine.
To reuse paper that has been folded once, firmly flatten any creases before loading it. If paper remains creased, it may cause a folding-position misalignment or paper jam, or damage to the machine.
2
Press Finishing and Select punch to select the desired finishing.
To set the finishing, press Finishing to turn on the lamp. To set the punch, press Select punch to turn on the lamp.
Punch settings are available together with the corner staple or 2-staple option.
3
Press the Start/stop key.
If the Start/stop key is pressed during operation, the operation will be stopped.
in the upper-right of a page, it turns into 
and is registered as a bookmark.