1

Output Tray 2

Outputs printed pages.

2

Output Tray 1

Outputs printed pages.

3

Front Door

Open this door when clearing a paper jam or staple jam or when replacing a staple cartridge.

4

Horizontal Transport Unit Cover

Outputs printed pages.

Open this cover when removing paper that caused a paper jam in the horizontal transport unit.

5

Guide Lever [FS4]

Turn this lever to clear a paper jam.

6

Guide Lever [FS5]

Turn this lever to clear a paper jam.

7

Jam Removal Dial [FS3]

Turn this dial to remove paper that caused a paper jam in the finisher.

8

Jam Removal Dial [FS1]

Turn this dial to remove paper that caused a paper jam in the finisher.

9

Punch Kit

Punches printed sheets for filing by installing the Punch Kit in the finisher.

10

Punch Scrap Box

Remove this box when disposing of punch scraps.

11

Staple Cartridge

Pull out this cartridge from the finisher when clearing a staple jam or replacing a staple cartridge.

12

Staple Scrap Box

Remove this box when disposing of cut staple scraps.

13

Handle [SD2]

Turn this handle to clear a paper jam.

14

Handle [SD1]

Hold this handle when moving the Saddle Stitcher in and out.

15

Jam Removal Dial [SD3]

Turn this dial to remove paper that caused a paper jam in the finisher.

16

Saddle Stitcher

Pull out this unit when clearing a paper jam or staple jam or when replacing a saddle staple cartridge.

17

Manual Staple

Used to manually staple printed sheets at the corner.

For details, refer to Using Manual Staple.

18

Z Folding Unit

If the Z-fold unit is installed on the finisher, the machine z-folds the long side of the copied paper before feeding it out.

19

Jam Removal Dial [FS2]

Turn this dial to remove paper that caused a paper jam in the finisher.

20

Guide Lever [FS9]

Turn this lever to clear a paper jam.

21

Guide Lever [FS8]

Turn this lever to clear a paper jam.

22

Guide Lever [FS7]

Turn this lever to clear a paper jam.

23

Guide Lever [FS6]

Turn this lever to clear a paper jam.

24

Saddle Staple Cartridge 1

Pull out this cartridge from the Saddle Stitcher when clearing a staple jam or replacing a saddle staple cartridge.

25

Saddle Staple Cartridge 2

Pull out this cartridge from the Saddle Stitcher when clearing a staple jam or replacing a saddle staple cartridge.

26

Guide Lever [SD4]

Turn this lever to clear a paper jam.

27

Guide Lever [SD5]

Turn this lever to clear a paper jam.

28

Folding Output Tray

Used to feed out the printed fold/bind paper.

29

Stopper

Prevents output sheets from falling.

You can change the angle of the Output Tray. For details, contact your service representative.