Adjusting Printing Troubles (For Administrators)

To adjust the level to highlight the original background ([AE Level Adjustment])
To adjust the print starting position or print image troubles ([Printer Adjustment])
To adjust the staple, punch, or fold position ([Finisher Adjustment])
To adjust the image density for each color depending on the paper type ([Density Adjustment])
To correct the misalignment or tilt of a scanning area in order to stabilize high-quality printing ([Image Stabilization])
To adjust the balance of the paper separation or image transfer performance when a paper jam or image failure occurs during double-sided printing ([Paper Separation Adjustment])
To adjust a color misalignment caused as the printing result ([Color Registration Adjust])
To adjust to the regular gradation ([Gradation Adjustment])
To adjust the density balance of the printing result ([Density Balance Adjust])
To adjust the area to scan an original on the original glass ([Scanner Area])
To adjust the area to scan an original on the ADF ([ADF Adjustment])
To configure settings for detecting and cleaning dirt on the slit glass ([Line Detection])
To register unregistered special paper as user paper ([User Paper Settings])
To specify how to erase the area other than the original when enabling [Non-Image Area Erase] for copying ([Erase Adjustment])
To directly print CMYK data without using a simulation profile when printing data using the PS driver ([PS Designer Settings])