* Enter the name of the utility key. You can search descriptions of utility keys.

1st Tri-Fold Position Adjustment

To display: [Utility][Administrator Settings][System Settings][Expert Adjustment][Finisher Adjustment][1st Tri-Fold Position Adjustment]

If the tri-fold positions are not located evenly, use this option to adjust the first fold position.

Copy after configuration, then repeat adjustments as required.

Settings

Description

[Paper Size]

Select the size of paper that is used to adjust the fold position.

[Adjust Value]

Enter an adjustment value between -10.0 and 10.0 mm by tapping [-] and [+].

  • [-]: Move the fold position to the left.

  • [+]: Move the fold position to the right.

[0.0 mm] is specified by default.

Tips

  • bizhub C658/C558/C458:
    To use this function, the optional Finisher FS-537 and Saddle Stitcher SD-512 or the optional Finisher FS-536 and Saddle Stitcher SD-511 are required.

  • bizhub C368/C308/C258:
    To use this function, the optional Finisher FS-534 and Saddle Stitcher SD-511 are required.

  • Make adjustment while checking paper folded at a displaced position.

  • The value you set by selecting [All] in [Paper Size] will be added to the setting for each paper size.