Printing on Banner Paper

Printing on banner paper

This machine accommodates paper with a length of up to 47-1/4 inches (1,200 mm) in the Bypass Tray.

Tips

  • This function is available when the Web browser function is disabled. When the optional Extension Memory is installed, this function is available regardless of whether the Web browser function is enabled or disabled. bizhub C658/C558/C458 provides Extension Memory as standard.

Printable paper

Paper width

Paper length

Paper weight

8-1/4 to 11-11/16 inches (210 to 297 mm)

18 to 47-1/4 inches (457.3 to 1200 mm)

33-13/16 to 55-7/8 lb (127 g/m2 to 210 g/m2)
(Using the printer driver, select the paper type appropriate for the weight of the banner paper to be used.)
32-3/16 to 41-3/4 lb (121 g/m2 to 157 g/m2): Thick 1+, Thick 1+(Side 2)
42 to 55-5/8 lb (158 g/m2 to 209 g/m2): Thick 2, Thick 2 (Side 2)
55-7/8 lb (210 g/m2): Thick 3, Thick 3 (Side 2))

Tips

  • When printing data on banner paper, select a paper type appropriate to the banner paper using the printer driver. Then, the [Paper Tray] is set to [Bypass Tray] and [Resolution] is fixed to [600dpi].

How to print on banner paper

Specify the banner paper size.

preconditionIf [ID & Print] is set to [ON] in [ID & Print Settings], printing on banner paper is disabled (default: [OFF]). For details on [ID & Print Settings], refer to [ID & Print Settings] .

  1. On the Touch Panel of this machine, tap [Utility] - [Banner Printing].

  2. Select [Allow], then tap [OK].

  3. Check that the screen waiting for banner printing job has appeared.

    supplementary explanationWhen a banner printing job is queued, the machine can receive the following print jobs, excluding banner printing jobs.
    Printing from the computer: Print, Secure Print, Save in User Box, Save in User Box and Print, Proof Print, ID&Print
    Direct printing from Web Connection: Print, Secure Print, Save in User Box, Proof Print, ID&Print

    supplementary explanationWhen a banner printing job is queued, the machine can receive the following fax jobs.
    G3 Fax, Internet Fax, IP Address Fax, PC-Fax

    supplementary explanationThe following jobs remain queued until a banner printing job is released.
    Forward TX, Relay Distribution, TSI Routing, Timer TX, PC-Fax TX

    supplementary explanationWhen a banner printing job is queued, the following operations cannot be carried out.
    Printing, sending, and downloading files in a User Box from Web Connection, WS scan, TWAIN scan

    When you have finished the above settings, start to print from the PC.

  4. In [Original Size] in the [Basic] tab, select [Custom Size].

  5. Specify the width and length of the banner paper, and click [OK].

    The [Confirm setting changes] dialog box appears.

  6. Click [Yes].

    The [Paper Tray], [Paper Type], and [Print Type] settings are switched.

    supplementary explanationClick the [Paper Settings for Each Tray...], and change the type of papers on the Bypass Tray according to the weight of print papers.

    supplementary explanationIf [Resolution] is set to [1200dpi (Rasterize on Device)], it is switched to [600dpi].

  7. Execute printing.

    A message appears on the Touch Panel to prompt you to load papers.

  8. Load the banner paper into the Bypass Tray.

    supplementary explanationFor information on how to load banner paper into the Bypass Tray, refer to [Loading banner papers] .

  9. When you have loaded a banner paper, tap [Complete].

    Printing on the banner paper starts. Support the ejected banner paper by hand. To continue printing, execute printing from the computer.

  10. Tap [Exit].

    A message confirming the end of banner printing is displayed. To terminate printing, tap [Yes].

    supplementary explanationIf there is a queued job, the job is started.