Loading Paper into the LCT (built-in)
LCT (built-in) is available when the optional Paper Feed Cabinet is installed on this machine.
1
Pull out the LCT (built-in) tray.
2
Load paper into the tray with the print side facing up.
When printing on letterhead (paper where company names, preset text, and other text or images are already printed), load it with the print side facing down. Up to 20 letterhead sheets can be loaded into a tray.
For details on the available paper, refer to Paper.
NOTICE
- Do not load an excessive number of sheets such that the top of the stack is higher than the
mark. - Do not load the LCT (built-in) tray with paper of a size other than that previously specified. When changing the paper size, contact your service representative.
- If paper is curled, flatten it before loading it.
3
Close the LCT (built-in) tray.
When you change the paper type, proceed to step 4 to change the setting on this machine.
When you do not change the paper type when adding paper, you can use the current setting without making any changes.
4
Change tray paper settings on the Paper Settings screen.
When loading paper other than plain paper, change the paper type setting. For details, refer to Changing the paper type.
in the upper-right of a page, it turns into 
and is registered as a bookmark.