[PDL Setting]

Select the Page Description Language (default: [Auto]). When you select [Auto], this machine automatically switches between PCL and PS.

[Image Quality Setting]

Select the optimum quality setting mode for the original (default: [Document/Photo]).

• [Document/Photo]: Applies the image quality setting suitable for originals containing multiple elements, such as text, graphs, figures, and photos.

• [Document]: Applies the image quality setting suitable for originals containing texts primarily.

• [Photo/DTP]: Applies the image quality setting focused on the image quality.

• [CAD]: Applies the image quality setting suitable for originals composed of thin lines. Images are reproduced in high resolutions.

[Edge Definition]

Select whether to highlight edges of an image (default: [Weak]).

Select this option to sharpen the edges of images such as text in the table and graphics to improve legibility when clearing small or faint text.

[Number of Sets]

Enter the number of copies to be printed (default: [1] copy).

[Original Direction]

Select the orientation of the image to be printed (default: [Portrait]).

[Gloss Mode]

Select whether to make an image glossy for printing (default: OFF).

[Toner Save]

Select whether to save toner consumption by reducing the printing density (default: OFF).

[Binding Direction Adjustment]

Select how the binding position is adjusted on two-sided printed sheets (default: [Finishing Priority]).

• [Finishing Priority]: After all pages are received, the binding position is adjusted and printing is started.

• [Productivity Priority]: Each time a page is received, the binding position is adjusted and printing is started.

• [Control Adjustments]: The printing position is not adjusted. The pages are printed according to the settings specified in the printer driver.

[Spool Print Jobs in HDD before RIP]

When saving the next print job on the storage if the job is received while another print job is being executed, select ON (default: ON).

[A4/A3< - >LTR/LGR Auto Switch]

Select whether to use paper of a size similar to the size specified in [Paper Size] if the specified paper is not loaded in the paper tray (default: OFF).

In normal circumstances, select OFF. When you select ON, size conversion between A4 and Letter automatically occurs and images may be partially lost.

[Banner Sheet Setting]

Select whether to print a banner page (front cover) that contains the sender or title of print data (default: OFF).

[Line Width Adjustment (600dpi)]

Select how to adjust the text or line width when printing with 600 dpi resolution (default: [Standard]).

• [Thin]: Select this option to draw letters and lines thinly. Details of letters and figures can be printed elaborately.

• [Slightly Thin]: Select this option to draw letters and lines with a thickness between [Thin] and [Standard].

• [Standard]: Select this option to draw letters and lines with a normal thickness.

• [Slightly Thick]: Select this option to draw letters and lines with a thickness between [Standard] and [Thick].

• [Thick]: Select this option to draw letters and lines thickly. Letters and figures are printed clearly.

[Line Width Adjustment (1200dpi)]

Select how to adjust the text or line width when printing with 1200 dpi resolution (default: [Standard]).

• [Thin]: Select this option to draw letters and lines thinly. Details of letters and figures can be printed elaborately.

• [Slightly Thin]: Select this option to draw letters and lines with a thickness between [Thin] and [Standard].

• [Standard]: Select this option to draw letters and lines with a normal thickness.

• [Slightly Thick]: Select this option to draw letters and lines with a thickness between [Standard] and [Thick].

• [Thick]: Select this option to draw letters and lines thickly. Letters and figures are printed clearly.

[Gray Background Text Correction]

Select whether to prevent text or lines on a gray background from appearing thicker than they actually are (default: ON).

Selecting ON makes the text and lines on a gray background look to have the same width as the text and lines on a non-gray background.

[Minimal Print]

Select whether to slightly reduce the size of the entire page when directly printing a PDF, PPML, or OOXML (docx, xlsx, or pptx) file (default: OFF).

This function is available when printing the entire original image, including its edges.

[OOXML Print Mode]

Select whether to give priority to either the image quality or speed when directly printing an OOXML (docx, xlsx, or pptx) file (default: [Prioritize Speed]).

[Print/Fax Output]

Select when to start printing received data.

• [Print]: Select the timing to start printing received data (default: [Save & Print]).
  [Batch Print]: Printing is started after all pages are received.
  [Save & Print]: Printing is started as the first page is received.

• [Fax]: Select the timing to start printing received fax data (default: [Batch Print]).
  [Batch Print]: Printing is started after all pages are received.
  [Save & Print]: Printing is started as the first page is received.
  For Internet Fax, Batch Print is always selected.

[Paper Tray]

Specify the paper tray (default: [Auto]).

[Paper Size]

Select the size for the printing paper (default: [A4] (metric area) / [8 1/2" e 11"] (inch area)).

[Paper Type]

Select the type for the printing paper (default: [No Selection]).

[2-Sided Print]

Select whether to print an original on both sides of paper when data containing multiple pages is printed (default: OFF).

[Binding Position]

Select the binding position for 2-sided printing (default: [Left Bind]).

[Banner Sheet Paper Tray]

Select a paper tray to print a banner page (front cover) (default: [Auto]).

[Select Color]

Select the printing colors (default: [Auto Color]).

• [Auto Color]: The color mode is automatically selected according to the original color.

• [Gray Scale]: The original is printed in black and white regardless of whether the original is in color or in black and white.

• [2 Color (Text Priority)]: The gray areas and color areas of an original are printed with a combination of the colors specified in [Select 2 color]. This option provides color reproducibility focused on the visual quality of text.

• [2 Color (Photo Priority)]: The gray areas and color areas of an original are printed with a combination of the colors specified in [Select 2 color]. This option provides color reproducibility focused on the visual quality of photos.

[Symbol Set]

Select the desired font symbol set (the default value varies depending on the area you are in).

[Font Settings]

Select the desired font (default: [Courier]).

• [Select Typeface]: Select the desired font from the fonts built in this machine or the fonts downloaded to this machine.

[Font Size]

Specify the default font size value.

• [Scalable Font]: Enter the font size (in points) for scalable fonts (with different widths for each character) (default: [12.00 Point]).

• [Bitmap Font]: Enter the font width (in pitches) for bitmap fonts (with the same width for each character) (default: [10.00 Pitch]).

[Line/Page]

Enter the number of lines of text data to be printed on one page (the default value varies depending on the area you are in).

[CR/LF Mapping]

Select whether to replace the line feed codes when printing text data (default: [OFF]).

[Bar Code Font Settings]

Configure settings for the bar code font.

• [Bar Code Line Width]: Specify the line width of the bar code font (default: [00%]).

• [Bar Code Space Width]: Specify the space width of the bar code font (default: [00%]).

[Thin Line]

When drawing a thin line in reduced-size printing mode, set this option to ON (default: ON).

This is effective for thin lines such as table borders created in Excel, but not for thin lines used in illustrations.

[Auto Trapping]

When superimposing adjacent colors for printing so as not to generate a white space around a picture, set this option to ON (default: OFF).

Setting to ON prevents the generation of white lines at the boundaries of colors in graphs or figures.

[Select Color]

Select the printing colors (default: [Auto Color]).

• [Auto Color]: The color mode is automatically selected according to the original color.

• [Full Color]: The original is printed in full color regardless of whether the original is in color or in black and white.

• [Gray Scale]: The original is printed in black and white regardless of whether the original is in color or in black and white.

[PS Error Print]

To print error information when an error occurs during PS rasterization, set this option to ON (default: OFF).

[Auto Trapping]

When superimposing adjacent colors for printing so as not to generate a white space around a picture, set this option to ON (default: OFF).

Setting to ON prevents the generation of white lines at the boundaries of colors in graphs or figures.

[Black Overprint]

Select whether to print so as to prevent white space being generated around a black character or figure (default: [OFF]).

• [Text/Figure]: Adjacent portion between a text and figure is overprinted with black. Use this setting when a white line appears around the black portion in a graph or figure.

• [Text]: Black is overprinted on the adjacent colors in the text portion. Use this setting when a white line appears around the text.

• [OFF]: The data is printed as is without overprinting with black.

[ICC Profile Settings]

Specify the default profile setting to be displayed in the printer driver.

• [Photo - RGB Color]: Select the default setting for RGB color for photographs (default: [sRGB]).

• [Photo - Output Profile]: Select the default setting for output profile for photographs (default: [Auto]).

• [Text - RGB Color]: Select the default setting for RGB color for text (default: [sRGB]).

• [Text - Output Profile]: Select the default setting for output profile for text (default: [Auto]).

• [Figure/Table/Graph - RGB Color]: Select the default setting for RGB color for figures, tables, and graphs (default: [sRGB]).

• [Figure/Table/Graph - Output Profile]: Select the default setting for output profile for figures, tables, and graphs (default: [Auto]).

• [Simulation Profile]: Select the default setting for simulation profile (default: [Auto]).
  If [Simulation Profile] is set to [Auto] while [Utility] - [Expert Adjustment] - [PS Designer Settings] is set to [No], use a simulation profile based on your processing.

[Auto Paper Select]

Select the method to determine the printing paper size (default: [Auto]).

• [Auto]: TIFF/JPEG (JFIF)/PDF images are printed on paper of the same size as the image.
  However, a JPEG (EXIF) image is enlarged or reduced for printing to fit the paper size specified in [Basic Setting] - [Paper Size].

• [Priority Paper Size]: Prints an image on the paper of the size specified in [Basic Setting] - [Paper Size].

[XPS/OOXML/PDF Digital Signature]

When verifying the digital signature to print an XPS, OOXML (docx, xlsx, or pptx), or PDF file with the digital signature added, set this option to ON (default: OFF).

When ON is selected, the data is not printed if the signature is invalid.

[Sheet/Book Print]

Select whether to print the currently selected sheet or the entire book when handling an Excel file (default: [Current Sheet]).

[Paper Size]

Select a paper size to print an OOXML (docx, xlsx, or pptx) file (default: [Auto]).

[Paper Type]

Select a paper type to print an OOXML (docx, xlsx, or pptx) file (default: [Auto]).

[Combination]

When reducing multiple pages to the same side of one sheet in order to print them, set this option to ON (default: OFF).

[Number of Page Combinations]

Specify the number of pages to place on a single sheet.

• [Column]: Enter the number of pages to be placed in the vertical direction of a single sheet (default: [1]).

• [Row]: Enter the number of pages to be placed in the horizontal direction of a single sheet (default: [1]).

[Combine Direction]

Select the page arrangement order (default: [Sideways from Upper-Left]).

[Page Spacing]

Specify a page space in line and column directions (default: [0]).

[Margin]

Specify a page margin at the top, bottom, right and left positions (default: [0]).

[Page Zoom]

Specify any scale to enlarge or reduce the page size (default: [Auto]).

[Print Page Border]

Select whether to print a border line between pages (default: OFF).