Finisher FS-P03
How to use Finisher FS-P03
By using an optional Finisher FS-P03, you can easily staple printed sheets in a corner. This function is useful for preparing a project proposal or other booklet materials.
To staple sheets, align their corners to Finisher FS-P03.
NOTICE
When repeating stapling, wait for three seconds or more after the first stapling has been completed to load the next sheets in order to prevent the internal temperature of Finisher FS-P03 rising excessively.
Tips- Up to 20 sheets (plain paper 90 (23-15/16 lb (g/m2))) can be stapled at one time.
- If Finisher FS-P03 does not function, turn this machine off and on, then reset Finisher FS-P03.
- Paper on which an image without margins has been printed will not be stapled because the sensor cannot detect it. Do not load paper on which an image without margins is printed.
Reference- For details on how to replace a staple cartridge, refer to [Finisher FS-P03] .
- For details on how to clear staple jams, refer to [Staple Jam in Finisher FS-P03] .