Checking the List of Optional Components

1

Main unit

Scans the original in the scanner section, and prints a scanned image in the printer section.

This unit is referred to as "machine", "main unit", or "C3851FS/C3851/C3351" in the manual.

2

Authentication Unit AU-102

Performs user authentication by scanning vein patterns in the finger.

To install the Authentication Unit AU-102, the Local Interface Kit EK-P05 or Local Interface Kit EK-P06 is required in addition to the Working Table WT-P02.

This unit is referred to as an Authentication Unit in the manual.

3

Authentication Unit AU-201S

Performs user authentication by scanning information recorded on the IC card or NFC-compatible Android terminal.

To install the Authentication Unit AU-201S, the Local Interface Kit EK-P05 or Local Interface Kit EK-P06 is required in addition to the Mount Kit MK-P02.

This unit can also be installed on the Working Table WT-P02.

This unit is referred to as an Authentication Unit in the manual.

4

Working Table WT-P02

Provides an area to temporarily place an original or other materials. This is also used when the Authentication Unit AU-102 or Authentication Unit AU-201S is installed or when Keyboard Holder KH-P01 is attached.

5

Keyboard Holder KH-P01

When using an external keyboard, attach this holder to Working Table WT-P02.

6

Finisher FS-P03

Staples the printed sheets.

For staples, use Staple Kit SK-501.

For details on how to use the Finisher FS-P03, refer to [How to use Finisher FS-P03] .

7

Keypad KP-101

It is equipped on the side of the Control Panel.

Allows you to enter numbers by using the Hardware Keypad.

8

Paper Feed Unit PF-P13

Allows you to load up to 500 sheets.

Up to two levels can be attached.

9

DESK DK-P03

Used to install this machine on the floor.

This unit is referred to as Desk in the manual.

10

Clean Unit CU-202

Collects small particles (UFP) generated in this machine to prevent them from escaping this machine.

Clean Unit CU-202 may not be available in some areas.

1

Fax Kit FK-517

Used to operate this machine as a fax machine.

bizhub C3851FS/C3851 provides the Fax Kit as standard.

2

Local Interface Kit EK-P05

Install this unit when using the voice guidance function, Authentication Unit AU-102, Authentication Unit AU-201S, or Upgrade Kit UK-216.

The speaker and USB port are added.

This unit is referred to as the Local Interface Kit in the manual.

3

Local Interface Kit EK-P06

Install this unit when using the voice guidance function, Authentication Unit AU-102, Authentication Unit AU-201S, Upgrade Kit UK-216, or the connection function with a Bluetooth LE-compatible iOS terminal.

The speaker, USB port, and receiving device for Bluetooth LE communication are added.

This unit is referred to as Local Interface Kit or Local Interface Kit (voice guidance / Bluetooth LE compatible).

• For details on the association with an iOS terminal, refer to [Associating this machine with an iOS terminal using Bluetooth LE] .

• For details on the user authentication of an iOS terminal, refer to [Employing Bluetooth LE authentication] .

4

Local Interface Kit EK-P07

Used to add an RS-232C port.

5

i-Option LK-102 v3

Supports the PDF processing function that is one of the advanced functions.

6

i-Option LK-104 v3

Supports the voice guidance function that is one of the advanced functions.

7

i-Option LK-105 v4

Supports the searchable PDF function that is one of the advanced functions.

8

i-Option LK-106

Used to add a bar code font that is one of special fonts.

9

i-Option LK-107

Used to add a unicode font that is one of special fonts.

10

i-Option LK-108

Used to add an OCR font that is one of special fonts.

In the standard, the OCR-B font (PostScript) is available. Installing the i-Option LK-108 allows use of the OCR-A font (PCL).

11

i-Option LK-110 v2

Used to add an advanced function that converts a file into the DOCX or XLSX type or generates highly-functional and high-quality data.

i-Option LK-110 v2 includes the function licenses for i-Option LK-102 v3 and LK-105 v4. If you purchase i-Option LK-110 v2, you do not need to purchase i-Option LK-102 v3 or LK-105 v4.

For details about functions able to be added, refer to [Advanced Functions] .

12

i-Option LK-111

Supports the ThinPrint function that is one of the advanced functions.

13

i-Option LK-114

Supports the serverless pull printing function that is one of the advanced functions.

14

i-Option LK-115 v2

You can use TPM (Trusted Platform Module) that is one of the advanced functions. Security enhancement is realized by encrypting confidential information such as certificates and passwords of this machine.

15

Upgrade Kit UK-211

• Install this unit when using i-Option LK-102 v3, LK-104 v3, LK-105 v4, LK-106, LK-107, LK-108, LK-110 v2, or LK-114.

• Install this unit when using My Address in association with My Panel Manager.

This unit is referred to as Extension Memory in the manual.

16

Upgrade Kit UK-216

Allows you to use this machine in a wireless network environment.

To install the Upgrade Kit UK-216, the Local Interface Kit EK-P05 or Local Interface Kit EK-P06 is required.

This unit is referred to as the Wireless LAN Interface Kit in the manual.

17

Mount Kit MK-P02

Required to have Authentication Unit AU-201S built in to the main unit.

18

Staple Kit SK-602

Used in the Finisher of bizhub C3851FS.

1

Working Table WT-P02

2

Keypad KP-101

3

Paper Feed Unit PF-P13 (Tray 2)

4

Paper Feed Unit PF-P13 (Tray 3)