Staple Jam in Finisher FS-P03

  1. Turn the Finisher FS-P03 by 90 degrees.

  2. Open the cover.

  3. Pull out the staple cartridge.

  4. Lift the face plate, then remove jammed or spilled staples.

  5. Return the face plate until it clicks.

  6. Insert the staple cartridge until it clicks.

  7. Close the cover.

  8. Turn the Finisher FS-P03 by 90 degrees to return it to the home position.

Tips

  • After clearing a staple jam, conduct idle stapling twice.