Replacing a Waste Toner Bottle
If the Waste Toner Bottle becomes full, this machine stops printing, and restarts printing after the Waste Toner Bottle is replaced.
Open the Front Door.
Press up the Waste Toner Bottle to unlock.
Hold the handles at the right and left of the Waste Toner Bottle, then carefully pull out the Waste Toner Bottle.
Inclining the Waste Toner Bottle may cause toner to spill.
Take a new Waste Toner Bottle out of the package box.
Put the used Waste Toner Bottle in the plastic bag included in the package, then store it in the package box.
To dispose of the used Waste Toner Bottle, use the recovery service or follow the regulations in your region.
Push the Waste Toner Bottle to the back to lock it.
Close the Front Door.
Do not throw toner or a container that contains toner (e.g., toner cartridge and developing unit) into an open flame. The hot toner may scatter and cause burns or other damage.
Do not leave toner-related parts (e.g., toner cartridge and developing unit) within easy reach of children. Licking any of these parts or ingesting toner could damage your health.
Do not store toner-related parts (e.g., toner cartridge and developing unit) near devices susceptible to magnetism, such as precision equipment and data storage devices, otherwise they may malfunction. They could cause these products to malfunction.
Do not force open the toner-related parts (e.g., toner cartridge and developing unit). If toner tumbles from the toner bottle, take utmost care to avoid inhaling it or even getting skin contact.
If toner lands on your skin or clothing, wash thoroughly with soap and water.
If you inhale toner, move to a place with fresh air and gargle with a lot of water repeatedly. Should you get symptoms such as coughing, seek medical advice.
If you get toner into your eyes, immediately rinse them with running water for over 15 minutes. Seek medical advice if irritation persists.
If you swallow toner, rinse out your mouth and drink a few glasses of water. Seek medical advice if necessary.