* Enter the name of the utility key. You can search descriptions of utility keys.
Punch Regist Loop Size Adjustment
To display: [Utility][Expert Adjustment][Finisher Adjustment][Punch Regist Loop Size Adjustment]
If the positions of the punch holes on the paper are not parallel to the paper edge, use this option to correct the obliquity of the paper to make them parallel.
Setting | Description |
|---|---|
[Paper Type] | Select the type of paper that is used to adjust the inclination. |
[Adjust Value] | Enter the adjustment value between -4 and 4 (default: [0]). Increase the setting value to adjust the paper inclination. When the inclination is not corrected or paper creases after the setting value was increased, reduce the setting value. |
Tips
This setting is displayed when the option is installed in this machine. For details on the required option, refer to [Administrator settings displayed by mounting options] .- Make necessary adjustments while checking a sheet of paper containing punched holes that are not in the correct positions.