* Enter the name of the utility key. You can search descriptions of utility keys.
Half-Fold Position
To display: [Utility][Expert Adjustment][Finisher Adjustment][Half-Fold Position]
If the half-fold position is not on the exact center of the paper, use this option to align the fold on the center.
Copy after configuration, then repeat adjustments as required.
Setting | Description |
|---|---|
[Paper Size] | Select the size of paper that is used to adjust the fold position. |
[Adjust Value] | Enter the adjustment value between -10.0 mm and 10.0 mm (default: [0.0 mm]). Increase the value when moving the folding position rightward, and reduce it when moving the folding position leftward. |
Tips
This setting is displayed when the option is installed in this machine. For details on the required option, refer to [Administrator settings displayed by mounting options] .- Adjust the half-fold position before adjusting the center staple position.
- Make adjustment while checking paper folded at a displaced position.
- The value you set by selecting [All] in [Paper Size] will be added to the setting for each paper size.
- For adjustments to put the fold position parallel with the left edge of paper, contact your service representative for instructions.