* Enter the name of the utility key. You can search descriptions of utility keys.

Punch Horizontal Position Adjustment

If the positions of the punch holes on the paper are displaced sideways, use this option to adjust the punch hole positions.

Copy after configuration, then repeat adjustments as required.

Setting	Description
[Paper Type]	Select the type of paper subject to punch hole position adjustment.
[Adjust Value]	Enter the adjustment value between -10 and 10 (default: [0]). Increase the value when moving the punching hole rightward, and reduce it when moving the punching hole leftward.

Setting

Description

[Paper Type]

Select the type of paper subject to punch hole position adjustment.

[Adjust Value]

Enter the adjustment value between -10 and 10 (default: [0]).

Increase the value when moving the punching hole rightward, and reduce it when moving the punching hole leftward.

Tips

This setting is displayed when the option is installed in this machine. For details on the required option, refer to [Administrator settings displayed by mounting options] .
Make necessary adjustments while checking a sheet of paper containing punched holes that are not in the correct positions.