* Enter the name of the utility key. You can search descriptions of utility keys.

IPsec

To display: [Utility][Administrator][Network][TCP/IP Setting][IPsec]

Configure settings to enable use of IPsec on this machine.

Setting

Description

[IPsec Setting]

Specify parameters required for IPsec communication.

  • [IKE]: Configure settings for IKE (Internet Key Exchange) ( [IKE] ).

  • [SA]: Configure settings for SA (Security Association) ( [SA] ).

  • [Peer]: Specify the IPsec peer ( [Peer] ).

  • [Protocol Setting]: Specify the IPsec protocol ( [Protocol Setting] ).

[Enable IPsec]

Configure settings to enable use of IPsec ( [Enable IPsec] ).

[Communication Check]

Enter the peer's IP address into [IP Address], then select Check Connection. If the connection fails, confirm communication error logs.