* Enter the name of the utility key. You can search descriptions of utility keys.

TCP/IP Settings1 (with Wireless LAN Interface Kit)

To display: [Utility][Administrator][Network][TCP/IP Setting][TCP/IP Settings1 (with Wireless LAN Interface Kit)]

Select a network to configure TCP/IP settings.

  • [Wired Setting]: Configure a setting to connect this machine to the wired network using TCP/IP. For details, refer to [TCP/IP Settings1] .

  • [Wireless Setting]: Configure a setting to connect this machine to the wireless network using TCP/IP. For details on settings, refer to the settings of [Wireless Setting] shown below.

Settings of [Wireless Setting]

Setting

Description

[IPv4]

Set the IPv4 address to this machine.

  • [IP Address Setting Method]: Select the method to specify the IP address to this machine according to your environment (default: [Auto Setting]). To manually specify the IP address, select [Manual Setting]. To automatically specify the IP address using DHCP, select [Auto Setting].
    [Auto Setting] is not displayed when [Wired + Wireless (Primary Mode)] or [Wired + Wireless (Wi-Fi Direct)] is selected in [Network I/F Configuration].

  • [IP Address]: When manually specifying the IP address, enter the fixed IP address assigned to the machine.

  • [Subnet Mask]: When manually specifying the IP address, enter the subnet mask.

[IPv6]

Displays the IPv6 settings of this machine.

  • [Link-Local Address]: Displays the link-local address. The link-local address is automatically specified from the MAC address of this machine.