Configuring the operating environment for FTP Send

Setting flow

The FTP transmission is a function that sends original data scanned on this machine to a specified folder in the FTP server.

When the proxy server is used, you can configure settings so that the FTP server is accessed via the proxy server.

When using the FTP transmission, follow the below procedure to configure the settings.

  1. Configuring network settings of this machine ( [Network Settings] )

  2. Configuring basic settings for FTP transmission ( [Configuring basic settings for the FTP transmission] )

  3. Configuring settings to suit your environment

    supplementary explanationUsing the proxy server ( [Using a proxy server] )

Configuring basic settings for the FTP transmission

Configure the settings for using the FTP Send function.

Select [Network] - [FTP Setting] - [FTP TX Setting] in administrator mode of Web Connection (or in [Utility] - [Administrator] of this machine), and configure the following settings.

Setting

Description

[FTP TX]

When using the FTP Send function, set this option to ON (default: ON).

[Connection Timeout]

If necessary, change the time-out time to limit a communication with the FTP server (default: [60] sec.).

[Port No.]

If necessary, change the FTP server port number (default: [21]).

Using a proxy server

When a proxy server is installed in your environment, register the proxy server.

Select [Network] - [FTP Setting] - [FTP TX Setting] in administrator mode of Web Connection (or in [Utility] - [Administrator] of this machine), and configure the following settings.

Setting

Description

[Proxy Server Address]

Enter the proxy server address. Use one of the following formats.

  • Example to enter the host name: "host.example.com"

  • Example to enter the IP address (IPv4): "192.168.1.1"

  • Example to enter the IP address (IPv6): "fe80::220:6bff:fe10:2f16"

[Proxy Server Port Number]

If necessary, change the proxy server port number (default: [21]).