* Enter the name of the utility key. You can search descriptions of utility keys.

PC-Fax RX Setting

To display: [Utility][Administrator Settings][Fax Settings][Function Settings][PC-Fax RX Setting]

Configure the settings for using the PC-Fax RX function.

PC-Fax RX is a function that automatically saves a received fax to the Compulsory Memory RX User Box or a user box specified in F-Code (SUB Address). A stored fax job can be read from the user box into a computer.

Settings

Description

[Allow]/[Restrict]

Select whether to use the PC-Fax RX function.

[Restrict] is specified by default.

[Receiving User Box Destination]

Select either [Memory RX User Box] or [Specified User Box] (a User Box specified in F-Code (SUB Address)) as the location to save received faxes.

[Print]

Select whether to print a received fax after it has been received.

[OFF] is specified by default.

[Password Check]

If you select [Specified User Box] for [Receiving User Box Destination], specify whether to check the communication password (Sender ID) for PC-Fax reception.

If [ON] is selected, enter the requested password (a number containing up to eight digits).