* Enter the name of the utility key. You can search descriptions of utility keys.

Protocol Setting

To display: [Utility][Administrator Settings][Network Settings][TCP/IP Settings][IPsec Settings][IPsec Settings][Protocol Setting]

Specify a protocol used for IPsec communication. Up to 10 protocols can be specified.

Select a group, then tap [Edit].

Settings

Description

[ON]/[OFF]

To register protocol settings, select [ON].

[OFF] is specified by default.

[Group Name]

Enter a group name for the protocol setting (using up to 10 characters).

[Protocol Identification Setting]

Select a protocol used for IPsec communication.

[Do Not Set] is specified by default.

[Port Specification Method]

If [TCP] or [UDP] has been selected in [Protocol Identification Setting], specify the port number used for IPsec communication.

[Message Type]

If [ICMP] or [ICMPv6] is selected in [Protocol Identification Setting], specify the type of ICMP message.

Tips
  • To check the registered protocol settings, select a group name, then tap [Mode Check].