* Enter the name of the utility key. You can search descriptions of utility keys.

Peer

To display: [Utility][Administrator Settings][Network Settings][TCP/IP Settings][IPsec Settings][IPsec Settings][Peer]

Register the peer of this machine to use IPsec. Up to 10 peers can be registered.

Select a group, then tap [Edit].

Settings

Description

[ON]/[OFF]

To register a peer, select [ON].

[OFF] is specified by default.

[Group Name]

Enter a peer name (using up to 10 characters).

[Addressing Mode]

Select the method to specify the peer address. Specify the IP address of the peer depending on the selected method.

[Pre-Shared Key Text]

Enter the Pre-Shared Key text to be shared with a peer using up to 128 ASCII characters or up to 256 hexadecimal characters.

Specify the same text as that for the peer.

[Key-ID String]

Enter the Key-ID to be specified for the Pre-Shared Key (using up to 128 bytes).

Tips
  • To check the registered peer settings, select a group name, then tap [Mode Check].