Main Messages and Remedies
Message | Cause | Remedy |
---|---|---|
[TX failed due to error. Please check Job History.] | Redial was attempted the number of times specified, however, transmission failed because the recipient was busy or due to other reasons. | Check the recipient's state and then resend the fax. |
[Unable to check sender.] | The machine failed to verify the recipient with Check Dest. & Send set to [ON]. | Check that the recipient's fax number is correctly registered. |
[Not enough memory to continue scanning. Send as much as scanned by pressing the [Send] key or press the [Delete] key.] | All the available space in the memory has been used up by document scanning. | Press the Start key to send document pages that have already been, then press the Stop key to abort the job. |
[Transmission failed. Please check line connection.] | The modular cable may be disconnected. | Check the modular cable connection and, if unplugged, plug it in securely. |
[Server connection error.] | (1) The network cable is not connected correctly. (2) Under [Administrator Settings], [Network Settings] are not set correctly. | (1) Make sure that the network cable is correctly connected. (2) Under [Administrator Settings], check that [Network Settings] are set correctly. |
[Cannot select address for TX. Exceeded the maximum number of addresses allowed for broadcasting.] | The number of destinations specified exceeds the number possible for a broadcast transmission. | Reduce the number of broadcast destinations, or send the transmission in multiple batches. |
[Document could not be saved in User Box. Insufficient HDD memory. Please check Job History.] | The hard disk is full. | Delete unnecessary data, then try saving the data again. |
[The number of registered boxes has reached the maximum limit. No additional boxes can be created.] | The number of User Box that can be registered has reached the maximum number possible. | Delete unnecessary User Boxes then retry registration. |
[The number of documents in the box has reached the maximum limit. No additional documents can be stored.] | The number of documents that can be saved in a User Box has reached the maximum number possible. | Delete unnecessary documents then retry registration. |
[The number of programmed jobs has reached the maximum allowance. Please wait until a programmed job has been completed.] | The number of jobs that can be programmed has reached the maximum number possible. | Wait until a job has been completed, or delete a current job. |