When a Message Appears to Replace Consumables or Carry Out Cleaning
A message appears indicating the time(s) that expiring consumables used in this machine should be replaced. Also, a message appears when the Slit Scan Glass is dirty.
Replace consumables mentioned in the displayed message or clean the Slit Scan Glass.
A message recommending that parts be replaced indicates that certain consumables are running out. Although you can still continue to print for a while after the message is displayed, it is advisable to promptly prepare replacement consumables.
For Toner Cartridge: [Toner is low. Replace when indicated.] appears, followed by [Replace Toner Cartridge.]. Replace the Toner Cartridge based on the maintenance contract.
For Drum Unit: When the message [The Drum Unit needs to be replaced.] appears, replace it based on the maintenance contract.
For Developing Unit: When the message [The Developing Unit needs to be replaced.] appears, contact your service representative.
For Imaging Unit: When the message [The Imaging Unit needs to be replaced.] appears, contact your service representative.
For Waste Toner Box: When the message [Waste Toner Box needs to be replaced.] appears, replace it based on the maintenance contract.
Contact your service representative if the messages continue to appear even after replacement or cleaning has been carried out.
The settings made by the service representative are required to display a message about Drum Unit, Developing Unit, or Imaging Unit. For details, contact your service representative.