Loading Paper into the LCT (built-in)

Using the LCT (built-in) allows you to load a larger amount of paper than Tray1 to Tray4. It will be convenient to load the most frequently used paper. The LCT (built-in) is an option.

1. Pull out the LCT (built-in) tray.

   NOTICE

   • Be careful not to touch the Film.

2. Load paper into the right side of the LCT (built-in) tray so that the side to be printed faces up.

   When printing on letterhead (paper where company names, preset text, and other text or images are already printed), load it with the print side facing down.

   For details on the available paper sizes, refer to [Confirm the Available Paper Sizes] .

   NOTICE

   • Do not load an excessive number of sheets such that the top of the stack is higher than the mark.

   • Do not load the LCT (built-in) tray with paper of a size other than that previously specified. When changing the paper size, contact your service representative.

   • If paper is curled, flatten it before loading it.

3. Load paper into the left side of the LCT (built-in) tray so that the side to be printed faces up.

4. Close the LCT (built-in) tray.

5. When loading paper other than plain paper, change the paper type setting.

   For details, refer to [Paper] .