Returning the machine from the Power Save mode via the wireless network

Configure the setting to return the machine from the ErP Auto Power Off mode via the wireless network when the machine is connected to an Android/iOS terminal.

Tips
  • The optional Wireless LAN Interface Kit is required to use this function.

  • To use an Android/iOS terminal, you need to install Remote Access on the terminal.

  • This function is not available when the machine is used in the IPv6 environment.

  • This function is not available when [Network] - [Network I/F Configuration] is set to [Wireless Only].

  • To return the machine from the ErP Auto Power Off mode using an Android/iOS terminal, connect this machine to the Android/iOS terminal once in advance.

Reference

In the administrator mode, select [Network] - [Wireless Network Setting] - [Awake from ErP], then configure the following settings.

Settings

Description

[Awake from ErP]

Select the method to return the machine from the ErP Auto Power Off mode.

  • [Awake with Magic Packet]: The machine returns from the ErP Auto Power Off mode when receiving a magic packet.

  • [Awake with ARP + Unicast Communication]: The machine returns from the ErP Auto Power Off mode when receiving a unicast communication packet.

[Awake with Magic Packet] is specified by default.