How to Use the Power Key

When using this machine in factory default status

For detail on how to use the Power key when using this machine in factory default status, refer to [Operating the Power key (When using this machine in the factory default status)] .

When using the Power key as a Sub Power Off key

Press the Power key to switch this machine to the Power Save mode.

When the Power key is pressed, the status of this machine changes as shown below. Depending on how long the Power key is pressed, the state of the power save mode to be activated will differ.

Power key

Status of this machine

Status of LED

Description

Short press

Sub Power OFF

Light up:

Orange

This function reduces power consumption and has a greater power saving effect.

While the sub power is turned off, this machine can receive data or faxes, however, it cannot scan or print an original.

If data or faxes are received while the sub power is turned off, they are printed when the machine returns to the normal mode.

To enable the machine to return to the normal mode from the Sub Power Off status, press the Power key again.

Hold down

ErP Auto Power OFF

Flash:

Orange

This function provides a greater power saving effect than the sub power off mode, which is close to the state where the main power is turned off.

In ErP Auto Power Off mode, this machine cannot receive data or faxes, and also it cannot scan or print an original.

To enable the machine to return to the normal mode from the ErP Auto Power OFF status, press the Power key again.

NOTICE
  • Note that faxes cannot be received if the ErP Auto Power Off mode is selected in fax mode.