Operations Required to Use This Function

Checking a LAN cable for connection

Check that a LAN cable connected to the network is connected to the LAN port of this machine.

Checking the network settings

Check that an IP address is assigned to this machine. Tap [Utility] - [Device Information], and check that an IP address is displayed.

Reference

Configuring the Internet fax environment

Enable the Internet fax function. In addition, specify the information of this machine and settings required to send and receive E-mail.

How to configure the setting is explained using Web Connection. For details, refer to [Configure basic settings for sending and receiving an Internet fax] .

Registering Header Position

Register the machine name, company name, etc. to be printed on faxes.

For details on how to configure the settings, refer to [Header Information] .

Setting the date and time for the machine

Set the date and time on this machine to be printed on sent and received faxes.

For details on how to configure the settings, refer to [Date/Time Settings] .

Reference
  • If an NTP (Network Time Protocol) is used to set the time, the date and time on this machine can be automatically adjusted. How to configure the setting is explained using Web Connection. For details, refer to [Automatically configuring settings using NTP] .