[Auto]

Automatically configures the binding position of the original.

When the long side of the original is 297 mm (11-11/16 inches) or less, the binding position is set to the long side of the paper. When the long side of the original exceeds 297 mm (11-11/16 inches), the binding position is set to the short side of the paper.

[Left Bind]

Select this option when the binding position is set to the left of the original.

[Right Bind]

Select this option when the binding position is set to the right of the original.

[Top Bind]

Select this option when the binding position is set to the top of the original.

[ON]/[OFF]

Select [ON] to specify Book Original.

[Output Method]

Select the copy method of two-page spreads.

• [Book Spread]: Copy a two-page spread as one page.

• [Separation]: Copy the right and left pages of two-page spreads separately in the order of the page numbers.

• [Front Cover]: Copy the front cover and two-page spreads according to the page order of the original (scan in the order of front cover and two-page spreads).

• [Front & Back Covers]: Copy the front and back covers and two-page spreads according to the page order of the original (scan in the order of front cover, back cover, and two-page spreads).

[Frame Erase]

Erases the shadow of the surrounding that is created when the original cover cannot be closed properly due to the thickness of the original.

You can erase the four sides of the original to the same width. Additionally, you can erase the four sides of the original to different widths.

• [Frame]: Erases the four sides of the original to the same width. In [Erase Amount], specify the width to erase.

• [Top]/[Bottom]/[Left]/[Right]: Erases the four sides of the original by specifying different widths for different sides. Cancel the [Frame] setting, select the side to erase the frame, and specify the width to erase in [Erase Amount]. If you do not want to erase the side, cancel [Erase].

[Center Erase]

Specify the fold width to erase. This function erases the shadow created in the center when the original cover cannot be closed correctly due to the thickness of the original.

[Non-Image Area Erase]

If you select Book Original, this item is set automatically.

Automatically detects the original and erases shadows outside the original when making copies with the ADF open and the original placed on the Original Glass.

Cancel the setting if necessary.

[Centering]

If you select Book Original, this item is set automatically.

The original image is copied at the center of the page without enlarging it.

Cancel the setting if necessary.

[Binding Position]

If [Separation], [Front Cover] or [Front & Back Covers] is selected for [Output Method], select the two-page spread binding position.

Select [Left Bind] for two-page spreads of left binding, and [Right Bind] for two-page spreads of right binding.

Note that if the binding position is incorrectly specified, the page order of the two-page spread is reversed between the left- and right-hand pages.

[Original Size]

Specify the size of the original to be scanned.

[ON]/[OFF]

Select [ON] to specify Page Separation.

[Original Margin Position]

Select the two-page spread binding position from [Left Bind] and [Right Bind].

[Original Size]

Specify the size of the original to be scanned.

[ON]/[OFF]

Select [ON] to specify index original. Also select the size of the index original.

[Lighter Text]

If you want to enhance the background against text, adjust to the [Lighter Text] side.

[Standard]

Copy with the optimal balance between the background and text.

[Darker Text]

If you want to enhance text against the background, adjust to the [Darker Text] side.

[Contrast]

Adjust the shading of an image.

[Copy Density]

Adjust the copy density.

[Sharpness]

Sharpen the edges of the image to improve legibility.

Smoothen the rough contour or sharpen the blurred image.

[Sample Copy]

You can check the finishing by printing a sample copy.

Load the original on the Original Glass, and use the Start key to start copying.

[Sample Copy]

You can check the finishing by printing a sample copy.

Load the original on the Original Glass, and use the Start key to start copying.

[Sample Copy]

You can check the finishing by printing a sample copy.

Load the original on the Original Glass, and use the Start key to start copying.

[ON]/[OFF]

Select [ON] to specify Booklet.

[Left Bind]/[Right Bind]

Select the binding position of the copied sheets.

[Fold/Bind]

Staples copy outputs in the center the paper or fold them in the center before discharging.

• [Half-Fold]: Feeds out a copied sheet by folding it in two.

• [Center Staple & Fold]: Staples and feeds out a copied sheet by folding it in two.

[Paper]

Select paper for copying. Select paper which corresponds to the size of a two-page spread of the booklet.

[Original Size]

Specify the size of the original to be scanned.

[Cover Sheet]

Specify this option to insert a different sheet of paper from text pages as the front cover of a booklet.

• [Front(Copy)]: Copies the front page on the front sheet.

• [Front(Blank)]: Inserts a blank front sheet.

• [Paper]: Select the paper used for cover sheet.

[ON]/[OFF]

Select [ON] to specify Binding Margin.

[Margin Position]

Select the paper binding position.

• [Auto]: The binding direction is automatically set. When the long side of the file is 297 mm (11-11/16 inches) or less, the binding position is set to the long side of the paper. When the long side of the file exceeds 297 mm (11-11/16 inches), the binding position is set to the short side of the paper.

• [Left Bind]: Select this option when setting the binding position to the left of paper.

• [Right Bind]: Select this option when setting the binding position to the right of paper.

• [Top Bind]: Select this option when setting the binding position to the top of paper.

[Margin Adjustment Value]

Select [Margin Adjustment Value], and specify the margin value in [Margin Width].

[Original Direction]

Specify the original loading direction so that the vertical direction of the scanned original is set correctly.

[ON]/[OFF]

Select [ON] to shift an image.

[Front Side]/[Back Side]

Adjusts the image position on the print paper by shifting it in horizontal or vertical direction.

• [Shift Left]/[Shift Right]: Shifts the image to the left or right. Select the shift direction, and specify the shift amount in [Shift Width].

• [Shift Top]/[Shift Bottom]: Shifts the image upward or downward. Select the shift direction, and specify the shift amount in [Shift Width].

[Apply on Back]

Set this item to use the same settings as used on the front side for the rear side of the print paper.

[Original Direction]

Specify the original loading direction so that the vertical direction of the scanned original is set correctly.

[ON]/[OFF]

Select [ON] to specify Mirror Image.

[Original Size]

Specify the size of the original to be scanned.

[ON]/[OFF]

Select [ON] to specify Image Repeat.

[Image Repeat Setting]

Select the copy method on the paper.

• [With Margin]: Copy an original image including its edges repeatedly on a single sheet of paper. The number of times repeated is determined automatically according to the original and paper sizes, or zoom ratio.

• [Without Margin]: Copy an original image repeatedly as much as possible on a single sheet of paper. The images on the edge of the paper may be partially lost. The number of times repeated is determined automatically according to the original and paper sizes, or zoom ratio.

• [2/4/8 Repeat]: Copy an original image repeatedly for the registered number of times on a single sheet of paper. Images that do not fit the divided area will be partially lost.
  If you select [2 Repeat], you can specify the interval between images in [Repeat Interval].

[Scan Range]

You can either to set the machine to automatically detect the scan range (original size), or specify the scan range manually.

If the original is of a standard size, selecting [Auto Detect] causes the machine to automatically detect the size. If the machine cannot detect the size of irregular sized originals or photos, manually specify the size.

[ON]/[OFF]

Select [ON] to specify Image Adjust.

[Original Size]

Specify the size of the original to be scanned.

[ON]/[OFF]

Select [ON] to specify Transparency Interleave.

[Interleave Paper]

Select the paper tray for the paper to be inserted between transparencies.

The paper size of the transparencies loaded on the Bypass Tray is displayed in [Transparency]. Be sure to use the same size for loaded transparencies and the paper to be inserted.

[ON]/[OFF]

Select [ON] to set Cover Sheet.

[Front Cover]

Specify the method to insert a front cover.

• [Front(Copy)]: Copies the front page on the front sheet.

• [Front(Blank)]: Inserts a blank front sheet.

• [Paper]: Select the paper used for cover sheet. Use the same size cover and body sheets, and stack them in the same orientation. If you select [Front(Blank)] while the optional Post Inserter is mounted, you can select the paper tray of the Post Inserter.

[Back Cover]

Specify the method to insert a back cover.

• [Back (Copy)]: Copies the last page onto the back sheet.

• [Back(Blank)]: Inserts a blank back sheet.

• [Paper]: Select the paper used for back sheet. Use the same size cover and body sheets, and stack them in the same orientation. If you select [Back(Blank)] while the optional Post Inserter is mounted, you can select the paper tray of the Post Inserter.

[ON]/[OFF]

Select [ON] to set Insert Sheet.

[Insert Position]

Set a page number where you wish to insert a different sheet.

• Enter an insertion page number and tap [Add..] to register the insertion page number.

• If you have entered an incorrect page number, select this number and tap [Delete].

• If page numbers are entered in random sequence, they are automatically rearranged in ascending order.

[Insert Paper]

Select the paper tray loaded with the paper to be inserted.

• Use the same size insertion sheets and body sheets, and stack them in the same orientation. If you select [Blank] while the optional Post Inserter is mounted, you can select the paper tray of the Post Inserter.

[Insert Type]

Select whether or not to copy on the insertion paper.

[ON]/[OFF]

Select [ON] to specify Insert Image.

[Insert Page Position]

Specify a page number you want to insert a sheet into. The original is inserted after the page you have specified.

• Enter an insertion page number and tap [Add..] to register the insertion page number.

• If you have entered an incorrect page number, select this number and tap [Delete].

• If page numbers are entered in random sequence, they are automatically rearranged in ascending order.

[ON]/[OFF]

Select [ON] to set Chapters.

[Chapter Position]

Specify the chapter page to be printed on the front side.

• Enter the chapter location page number, and tap [Add..] to register the chapter page number.

• If you have entered an incorrect chapter page number, select this number, and tap [Delete].

• If page numbers are entered in random sequence, they are automatically rearranged in ascending order.

[Insert Chapter]

Select whether to use the same page or a different page for the chapter and the text.

• [OFF]: Copy all pages on the same paper.

• [Copy Insert]: Copy the first page of the chapter on the different type of paper form text pages. Select the paper tray loaded with paper to be inserted in [Chapter Paper].

[Chapter Paper]

If [Insert Chapter] is set to [Copy Insert], select the paper tray where the Chapter Paper is stacked.

If the chapter paper and text paper differ, use the same size of paper and stack them in the correct direction.

[ON]/[OFF]

Select [ON] to add the date/time.

[Date Format]

Select the date printing format.

[Time Format]

Select the time printing format. If you do not want to print the time, select [OFF].

[Pages]

Select the range of pages to print.

[Text Details]

If necessary, select the print size, font, and other conditions.

[Print Position]

If necessary, select the print position of the text. You can more finely adjust the print position in [Adjust Position].

[ON]/[OFF]

Select [ON] to set Page Number.

[Page Number Type]

Select the format of the page number.

[Starting Page Number]

Specify the starting page number to be printed on the first page.

For example, to print page numbers from the third page of the file, enter "-1". The first page of the file is counted as "-1", the second page as "0", and the third page is counted as "1". In [Starting Page Number], a page number is printed on pages 1 and later. If "2" is entered, page numbers are printed from the first page of the file as "2, 3", etc. in order. "-" (minus sign) switches "+" and "-" each time you tap [*].

[Starting Chapter Number]

Specify the starting chapter number if a file is divided into chapters, and you want to print chapter numbers from the second chapter. You can specify starting chapter numbers when you have selected [Chapter Page] in [Page Number Type].

For example, to print chapter numbers from the third chapter, enter "-1". The first chapter of the file is counted as "-1", the second chapter as "0", and the third chapter is counted as "1". In [Starting Chapter Number], a chapter number is printed on the chapters that are count as 1 and later. If "2" is entered, a number is printed from the first page of the first chapter of the file as "2-1, 2-2". "-" (minus sign) switches "+" and "-" each time you tap [*].

[Text Details]

If necessary, select the print size, font, and other conditions.

[Print Position]

If necessary, select the print position of the text. You can more finely adjust the print position in [Adjust Position].

[Insert Sheet Setting]

When you insert sheets using the Cover Sheet function of Insert Sheet function, specify whether or not to print a page number on the inserted sheet.

• [Cover Sheet]: Select whether to print a page number on a cover sheet. A cover page is counted as the number of pages even if [Do not print] is selected.

• [Insert Sheet (Copy)]: Prints - or does not print - a page number on the inserted copy paper. The inserted pages are counted as the number of pages even if [Do Not Print Number] is selected. If [Skip] is selected, the page number is not printed, and the inserted page is not counted as the number of pages.

• [Insert (Blank)]: Select whether to count a blank page as the number of pages when inserting blank paper. The inserted pages are counted as the number of pages if [Do Not Print Number] is selected. If the [Skip] is selected, the inserted pages are not counted as the number of pages.

[ON]/[OFF]

Select [ON] to specify Stamp.

[Stamp Imprint]

Select the stamp you want to print.

[Pages]

Select the range of pages to print.

[Text Details]

If necessary, select the print size and other conditions.

[Print Position]

If necessary, select the print position of the text. You can more finely adjust the print position in [Adjust Position].

[ON]/[OFF]

Select [ON] to set Stamp Repeat.

[Stamp Repeat Type]

Select a stamp used. The date and time can also be printed.

• [Preset Stamp]: Select a preset stamp to be printed.

• [Registered Stamp]: Select a registered stamp to be printed.

• [Date/Time]: Select a format (type) of date and time to be printed. The date/time when the original was scanned is stamped on the paper.

• [Other]: Specify the job number, the machine's serial number, and distribution control number to be printed.

[Stamp Selection]

The registration status of the stamp is displayed.

[Detail Setting]

Select the density, size, and pattern overwriting of print characters if necessary.

[Change/Delete Position]

Allows to check, change or delete the stamp position settings if necessary. You can change the stamp sequence and insert a space between stamps. When you select up to four stamps, you can change their angle (^45 degrees).

[ON]/[OFF]

Select [ON] to print the header/footer.

[Recall Header/Footer]

Select the header/footer to be printed. Select the header/footer from among those registered in advance.

[Check/Change Temporarily]

If necessary, check or temporarily change the details of the program that is selected in [Recall Header/Footer].

• [Header Setting]: Change the content of the header.

• [Footer Setting]: Change the content of the footer.

• [Pages]: Change the range of pages to print.

• [Text Details]: Change the print size and font.

[ON]/[OFF]

Select [ON] to specify Watermark.

[Watermark Type]

Select the watermark you want to print.

[ON]/[OFF]

Select [ON] to set Overlay.

[Pages]

Select the range of pages on which an overlay image is composed.

[Density]

If necessary, adjust the density of the overlay image to be composed.

[Original Size]

Specify the size of the original to be scanned.

[Composition]

Select how to compose an overlay image.

• [Transparent]: Print the overlay image on the original in a translucent tone.

• [Background (Orig.)]: Print an overlay image at the front side of the original.

• [Back]: Print an overlay image at the back side of the original.

[ON]/[OFF]

Select [ON] to set Registered Overlay.

[Recall Overlay Image]

Specify which side of the paper to compose the overlay image, and select an overlay image to be composed. Check the density, composition method, preview, and other conditions of overlay image if necessary.

If you set [Apply on Back], the image on the front side is composed on the back side of paper.

[Pages]

Select the range of pages on which an overlay image is composed.

[Original Size]

Specify the size of the original to be scanned.

[Reg. Overlay Image]

Register a new overlay image. If necessary, change the overlay image setting when it is registered.

• When registering a new overlay image, tap [New], and enter the name of the overlay image.
  Load the original on the machine, and scan the original; the image is registered. If multiple pages of original is loaded into the ADF, only the first page is registered.

• You can overwrite or delete registered overlay images.

[ON]/[OFF]

Select [ON] to set Copy Protect.

[Copy Protect Type]

Select a stamp used. The date and time can also be printed.

• [Preset Stamp]: Select a preset stamp to be printed.

• [Registered Stamp]: Select a registered stamp to be printed.

• [Date/Time]: Select a format (type) of date and time to be printed. The date/time when the original was scanned is stamped on the paper.

• [Other]: Specify the job number, the machine's serial number, and distribution control number to be printed.

[Stamp Selection]

The registration status of the stamp is displayed.

[Detail Setting]

Select the density, size, and pattern overwriting of print characters if necessary.

[Copy Protect]

Select how to print the copy protect pattern. Also, you can set the pattern contrast if necessary.

[Bkgd. Pattern]

Select a background pattern.

[Change/Delete Position]

Allows to check, change or delete the stamp position settings if necessary. You can change the stamp sequence and insert a space between stamps. When you select up to four stamps, you can change their angle (^45 degrees).

[ON]/[OFF]

Select [ON] to set Copy Guard.

[Stamp Text]

Select a stamp used. The date and time can also be printed.

• [Preset Stamp]: Select a preset stamp to be printed.

• [Date/Time]: Select a format (type) of date and time to be printed. The date/time when the original was scanned is stamped on the paper.

• [Other]: Specify the job number, the machine's serial number, and distribution control number to be printed.

[Stamp Selection]

The registration status of the stamp is displayed.

[Detail Setting]

If necessary, select the text printing format.

[Copy Guard]

If necessary set the contract of a copy guard pattern.

[Bkgd. Pattern]

Select a background pattern.

[ON]/[OFF]

Select [ON] to set Password Copy.

[Password]

Enter the password to restrict copying.

[Stamp Setting]

Set a stamp to be printed on each paper.

[Stamp Text]

Select a stamp used. The date and time can also be printed.

• [Preset Stamp]: Select a preset stamp to be printed.

• [Date/Time]: Select a format (type) of date and time to be printed. The date/time when the original was scanned is stamped on the paper.

• [Other]: Specify the job number, the machine's serial number, and distribution control number to be printed.

[Stamp Selection]

The registration status of the stamp is displayed.

[Detail Setting]

If necessary, select the text printing format.

[Password Copy]

Specify the contract of password copy guard pattern if necessary.

[Bkgd. Pattern]

Select a background pattern.

[ON]/[OFF]

Select [ON] to set Frame Erase.

[Frame]

Erases the four sides of the original by the same width amount. In [Erase Amount], specify the width to erase.

[Top]/[Bottom]/[Left]/[Right]

Specify a different width for each side of the original to erase the side. Cancel the [Frame] setting, select the side to erase the frame, and specify the width to erase in [Erase Amount]. If you do not want to erase the side, cancel the setting for [Erase].

[ON]/[OFF]

Select [ON] to set Save in User Box.

[User Box]

Select a User Box to save files in.

You can select a User Box from Public, Personal, Group User Box and Annotation User Box.

[File Name]

If necessary, change the file name to save it.

[Save & Print]

Set this option to save the document in a User Box and print at the same time.

[ON]/[OFF]

Select [ON] to specify Card Shot.

[Original Size]

Specify the size of a card to be copied. From the [Registered Paper Size], you can recall a size previously stored and specify the size.

After you have entered the size, select a key in [Registered Paper Size], and tap [Register]. Then the size you have entered is registered in the memory. You can recall the registered size at a later date.

[Registered Paper Size]

Displays the sizes registered in memory.

When you call a registered size from the memory, tap the key of the desired registration name, then tap [Recall].

[Layout]

Select the layout for arranging the front side and back side of the card on the paper from [Top/Bottom], [Left/Rt-Top], and [Left/Right].

[Zoom]

Select a zoom ratio for copying.

• [Full Size]: Copy by enlarging according to the paper size.

• [x1.0]: Copy with the same size as the card.

[Change registered size name]

Change the name of the key you selected in [Registered Paper Size].