[Text]

Copies an original, which consists primarily of text, at the optimum image quality level.

This function sharpens the edges of each character, creating easy-to-read images.

[Text/Photo Printed]

Copies the original, which consists of text and photos, at the optimum level of image quality.

This function sharpens the edges of each character and reproduces smoother photos.

Select this option to scan printed originals such as brochures and catalogs.

[Text/Photo PhotoPaper]

Copies the original, which consists of text and photos, at the optimum level of image quality.

This function sharpens the edges of each character and reproduces smoother photos.

Select this option to scan originals that include photos printed on photographic paper.

[Photo Printed]

Copies an original consisting only of photos at the optimum image quality level.

Select this option to scan printed originals such as brochures and catalogs.

[Photo PhotoPaper]

Copies an original consisting only of photos at the optimum image quality level.

Select this option to scan originals printed on photographic paper.

[Dot Matrix Original]

Copies an original, that primarily consists of text such as thin or faint characters, at the optimum image quality level.

This function reproduces text using high pixel density, creating easy-to-read text.

[Copied Paper]

Copies the original, which is output with an even density from the copier or printer, at the optimum image quality level.

[Recall Image Adjustment Program]

Call the image quality adjustment program. The registered content of a program is applied.

For the image adjustment program, you can register the settings of [Original Type], [Density], [Background Removal], [Text Enhancement], [Neg-/Pos. Reverse], [Image Adjustment], and [Mirror Image].

[Background Removal]

Copies a thin 2-sided original or an original with a colored background, at the optimum level of image quality.

• [Bleed Removal]: Select this option when you want to prevent bleeding of the back of the paper such as for 2-sided originals that are so thin that text or images on the back would also be scanned.

• [Paper Discoloration Adjustment]: Select this option to scan an original with a colored background such as a map.

[Background Removal Level]

Adjusts the density of the background color for an original with a colored background. If [Auto] is selected, the density of the background color is determined automatically, and the original is copied at the optimal background density level.

[Auto]

Automatically selects paper fitting the size of the original when making a copy.

Paper Tray

Specifies the paper loaded in the paper tray when making a copy.

The displayed contents vary depending on the options installed on this machine.

[Change Tray Setting]

If necessary, change the size and type settings of the paper loaded in the selected paper tray.

[Paper Type]

Select the type of the paper loaded in the selected paper tray.

[Paper Size]

Select the size of the paper loaded in the selected paper tray.

Selecting [Auto Detect] automatically detects the size of the loaded paper.

Selecting [Paper Size] allows you to specify the size that is measured by this machine. For details, refer to Registering a custom size of paper in memory.

[Metric Sizes]

When loading metric size paper into the paper tray, select the paper size.

[Inch Sizes]

When loading inch size paper into the paper tray, select the paper size.

[Env/Postcard] ([Envelope/4 e 6], [Envelope/A6 Card])

When loading postcards (4 e 6 or A6 Card) or standard-size envelopes into the paper tray, select the paper size.

[Other]

When loading paper such as the photo size into the paper tray, select the paper size.

[Custom Size Settings]

Enter the length (X) and width (Y) of paper.

After you entered the size, select a key ([memory1] to [memory5]) in [Registered Paper Sizes], and tap [New]. Then the size you have entered is registered in the memory. You can recall the registered size at a later date.

[Registered Paper Sizes]

The custom sizes registered in the memory are displayed.

• When you call a registered size from the memory, tap the key of the desired registration name, then tap [Recall].

• To change a registration name, select a desired key, then tap [Edit Name].

[Metric Sizes]

When loading wide paper in metric sizes into paper tray, select the paper size.

[Inches]

When loading wide paper in inch size into paper tray, select the paper size.

[Paper Size]

Displays the specified paper size.

Selecting [Change Size] allows you to change the paper size to the desired one.

[Auto]

Automatically makes a copy with the optimal zoom ratio to match the image of the original with the paper size. This is convenient because you do not need to specify the zoom ratio.

[+]/[-]

Enter the zoom ratio manually.

Fixed Zoom

Select a preset zoom ratio when copying a standard-size original onto standard-size paper.

The paper tray is automatically exchanged depending on the selected zoom ratio.

[Minimal]

Places an original image in the center after slightly reducing the original size when copying.

Select this option when copying the entire original image, including its edges.

[Manual]

Specify zoom ratios individually for the lengthwise and widthwise directions for copying.

Select [X] or [Y], and enter the zoom ratio.

[Zoom Ratio]

Makes a copy at the registered zoom ratio.

If you tap [Set Zoom], you can change the registered zoom ratio.

[Original -> Output]

Select a combination of the original to be loaded (1-sided original or 2-sided original) and the copy method (1-sided copy or 2-sided copy).

If you have selected other than [1Sided > 1Sided], also specify [Binding Position] and [Original Direction].

[Binding Position]

Select the binding positions of the original and copy.

[No. of Originals]

Select the original binding position when loading a 2-sided original.

• [Auto]: The binding position of the original is specified automatically. When the long side of the original is 297 mm (11-11/16 inches) or less, the binding position is set to the long side of the paper. When the long side of the original exceeds 297 mm (11-11/16 inches), the binding position is set to the short side of the paper.

• [Left Bind]: Select this option when the binding position is set to the left of the original.

• [Right Bind]: Select this option when the binding position is set to the right of the original.

• [Top Bind]: Select this option when the binding position is set to the top of the original.

[Output]

Select the binding position when printing on both sides of paper.

• [Auto]: The binding position of a copy is specified automatically. When the long side of the original is 297 mm (11-11/16 inches) or less, the binding position is set to the long side of the paper. When the long side of the original exceeds 297 mm (11-11/16 inches), the binding position is set to the short side of the paper.

• [Left Bind]: Select this option when setting the binding position to the left of a copy.

• [Right Bind]: Select this option when setting the binding position to the right of a copy.

• [Top Bind]: Select this option when setting the binding position to the top of a copy.

[Original Direction]

Specify the orientation of the loaded original.

[Auto]

Automatically switches between Sort and Group according to the number of printed sheets for each set, and feeds out. If the number of printed sheets for each set is 1, the Group function is applied. If the number is 2 or larger, the Sort function is applied.

[Group]

Feeds out copies separately page by page, for example: "111", "222", "333", "444", and "555".

[Sort]

Feeds out copies separately one by one, for example: "12345", "12345", and "12345".

[Corner]

Each set of printed sheets is stapled in a corner (top left or top right) before it is output.

[2 Position]

Each set of printed sheets is stapled at two positions (in the top, left, or right) before it is output.

[Position Setting]

Select the binding position and original loading direction. If [Auto] is specified for the binding position, the binding position is determined automatically based on the direction of the loaded original.

[Position Setting]

Select the punch position and original loading direction. If [Auto] is specified for the punch position, the punch position is determined automatically based on the direction of the loaded original.