Checking the List of Optional Components

1

Main unit

Scans the original in the scanner section, and prints a scanned image in the printer section.

This unit is referred to as "machine", "main unit", or "4752/4052" in the manual.

2

Authentication Unit AU-102

Performs user authentication by scanning vein patterns in the finger.

This unit is referred to as an Authentication Unit in the manual.

3

Authentication Unit AU-201S

Performs user authentication by scanning information recorded on the IC card or NFC-compatible Android terminal.

This unit is referred to as an Authentication Unit in the manual.

4

Keypad KP-101

It is equipped on the side of the Control Panel.

Allows you to enter numbers by using the Hardware Keypad.

5

Finisher FS-P02

Staples the printed sheets.

For staples, use Staple Kit SK-501.

6

Paper Feed Unit PF-P15

Allows you to load up to 250 sheets.

Up to three levels of this unit can be installed.

7

Paper Feed Unit PF-P16

Allows you to load up to 550 sheets.

Up to three levels of this unit can be installed.

8

Desk DK-P02

Used to install this machine on the floor.

This unit is referred to as Desk in the manual.

9

Clean Unit CU-203

Collects small particles (UFP) generated in this machine to prevent them from escaping this machine.

Clean Unit CU-203 may not be available in some areas.

1

Fax Kit FK-517

Used to operate this machine as a fax machine.

2

Local Interface Kit EK-P05

Install this unit when using the voice guidance function.

The speaker and USB port are added.

This unit is referred to as the Local Interface Kit in the manual.

3

Local Interface Kit EK-P06

Install this unit when using the voice guidance function or the connection function with a Bluetooth LE-compatible iOS terminal.

The speaker, USB port, and receiving device for Bluetooth LE communication are added.

This unit is referred to as Local Interface Kit or Local Interface Kit (voice guidance / Bluetooth LE compatible).

• For details on the association with an iOS terminal, refer to [Associating this machine with an iOS terminal using Bluetooth LE] .

• For details on the user authentication of an iOS terminal, refer to [Employing Bluetooth LE authentication] .

4

Local Interface Kit EK-P07

Used to add an RS-232C port.

5

i-Option LK-102 v3

Supports the PDF processing function that is one of the advanced functions.

6

i-Option LK-104 v3

Supports the voice guidance function that is one of the advanced functions.

7

i-Option LK-106

Used to add a bar code font that is one of special fonts.

8

i-Option LK-107

Used to add a unicode font that is one of special fonts.

9

i-Option LK-108

Used to add an OCR font that is one of special fonts.

In the standard, the OCR-B font (PostScript) is available. Installing the i-Option LK-108 allows use of the OCR-A font (PCL).

10

i-Option LK-111

Supports the ThinPrint function that is one of the advanced functions.

11

i-Option LK-114

Supports the serverless pull printing function that is one of the advanced functions.

12

i-Option LK-115 v2

You can use TPM (Trusted Platform Module) that is one of the advanced functions. Security enhancement is realized by encrypting confidential information such as certificates and passwords of this machine.

13

Upgrade Kit UK-219

• Install this unit when using i-Option LK-102 v3, LK-104 v3, LK-106, LK-107, LK-108, or LK-114.

• Install this unit when using My Address in association with My Panel Manager.

This unit is referred to as Extension Memory in the manual.

14

Upgrade Kit UK-216

Allows you to use this machine in a wireless network environment.

This unit is referred to as the Wireless LAN Interface Kit in the manual.

The models for North America provide Upgrade Kit UK-216 as standard.

1

Keypad KP-101

2

Paper Feed Unit PF-P15 or Paper Feed Unit PF-P16

1

Finisher FS-P02