Registering an IP address fax program
A program can be registered or edited using Web Connection. Although character input is a difficult process using the Touch Panel, it can be carried out easily if you use the computer.
A combination of address information and the fax/scan transmission option settings can be registered in a program.
The following describes the IP address fax program.
In the administrator mode, click [Store Address] - [Program] - [Registration]. Select [Search from Function] - [IP Address Fax], then configure the following settings.
Settings | Description |
|---|---|
[Name] | Enter the name of the program (using up to 24 characters). Assign a name that helps you easily identify the program. |
[Destination Information] | Click [Search from List], and select a destination IP address fax from the list. Click [Check Destination] to check registered address books. If you wish to manually enter a destination IP address fax, select [Direct Input] and enter the IP address fax.
|
[Basic Setting]/[Application Setting] | Configure the Scan option settings. For details, refer to [Configuring the fax/scan transmission option settings] . |
[Limiting Access to Destinations] | Limit access to this destination, if necessary. For details, refer to [Methods to limit access to destinations] . |
Tips
To use this function, the optional Fax Kit is required.