Operations Required to Use this Function

Checking a LAN cable for connection

Check that a LAN cable connected to the network is connected to the LAN port of this machine. For details on the cable connection port, refer to [Rear side] .

Checking the network settings

Check that an IP address is assigned to this machine. Tap [Utility] - [Device Information], and check that an IP address is displayed.

Reference

• If no IP address is displayed, you need to configure the network. For details, refer to [Configuring network environment settings] .

Checking the environment to use the FTP Send function

Enable the FTP Send function. (You can use this function with the default settings unless otherwise requested.)

How to configure the setting is explained using Web Connection. For details, refer to [Configuring basic settings for the FTP transmission] .