Changing Tray Paper Settings on the Control Panel

Changing the paper size

preconditionThe available paper type varies depending on the paper tray, so the displayed screen is different.

  1. Tap [Paper] on the home screen.

  2. Tap the tray to change paper settings.

  3. In [Paper Size], specify the size of the loaded paper.

    supplementary explanationSetting [Auto Detect] to ON automatically detects the size of the loaded paper (only for the optional Paper Feed Unit).

    supplementary explanationSelecting [Custom Size] from the drop-down list allows you to directly enter and specify the length and width of paper. For details, refer to [Specifying the custom size] .

    supplementary explanationIf you select the paper size category from the drop-down list, the system jumps to the selected category.

  4. Tap [OK].

Changing the paper type

preconditionThe available paper type varies depending on the paper tray, so the displayed screen is different.

  1. Tap [Paper] on the home screen.

  2. Tap the tray to change paper settings.

  3. In [Paper Type], specify the type of the loaded paper.

  4. Tap [OK].

Tips
  • When using plain paper of 15-15/16 lb to 18-5/8 lb (60 g/m2 to 70 g/m2), tap the setting icon () in [Plain Paper] of [Paper Type], and set to [Alter Thickness ON]. The paper tray set to [Alter Thickness ON] is placed to a low priority level among the paper trays in which plain paper is loaded. However, if [Alter Thickness ON] is set to all paper trays, the appropriate paper tray is selected based on the priority sequence specified in [Auto Paper Tray Selection Setting] ( [Auto Paper Tray Selection Setting] ).

Specifying the custom size

When loading custom-sized paper, directly enter the length and width of paper.

preconditionCustom-size paper can be loaded in Tray 1 or Bypass Tray.

  1. Tap [Paper] on the home screen.

  2. Tap the tray to change paper settings.

  3. Tap [Custom Size] from the drop-down list of [Paper Size].

  4. Specify the length and width of the paper.

  5. Tap [OK].