You can configure settings to verify the peer's certificate when communicating via IPsec.
Select [Utility] - [Administrator] - [Network] - [TCP/IP Setting] - [IPsec] - [IPsec Setting] - [Peer], and configure the following settings.
Setting | Description |
|---|---|
[Subject Verification] | When verifying the peer's certificate, specify which identification information contained in the certificate is to be targeted. Specify this information using either the Subject Alternative Name (SAN) or the DN (Distinguished Name). If using the Subject Alternative Name (SAN), you can specify the information from the DNS name, IP address (IPv4 or IPv6), or E-mail address. |