When the main power of this machine is turned on, the dedicated security chip operates before the system starts up to verify that the firmware has not been tampered with. If no tampering is detected, the machine proceeds to start up as usual. If tampering is detected, the machine either automatically restores to the normal state or halts startup for safety reasons in order to protect the device. This sequence of operations is referred to as Secure Boot.
If Secure Boot detects firmware tampering, this machine operates as follows: Take the appropriate action based on the situation.
If the firmware can be restored, the Security Kit automatically restores the firmware, and this machine starts up. After this machine starts up, check the message displayed on the Control Panel and continue using the machine.
If the firmware cannot be restored, an error message is displayed on the Control Panel, and the machine halts. To restore operations, contact your service representative.