Device Authentication
Overview
Users who are registered to the system can be easily authenticated via machine authentication simply by holding their IC card over Authentication Unit AU-201S.
Tips
- You must perform configuration through customer engineer and Authentication Unit AU-201S to use IC cards. For details, contact your service representative.
- A single IC card can be registered for each user. It is not possible to register more than 1 IC card to a single user. If you want to use a different IC card, overwrite the card information that is already registered with that card information.
- This function cannot be used if Enhanced Security Mode is set to ON.
Procedure
1
Set the user authentication to [ON (MFP)]. For details, refer to Procedure in Machine Authentication.
2
Press Utility/Counter, and then press in order of [Administrator Setting] - [User Auth./Account Track] - [Authentication Device Settings] - [General Settings] - [Card Authentication] - [IC Card type setting].
3
Select the IC card you want to use and press [OK].
Here, select [FeliCa].
4
Select [Operation Settings].
Here, select [Card Authentication].
5
Press [OK].
Registering IC Cards
1
Press Utility/Counter, and then press in order of [Administrator Setting] - [User Auth./Account Track] - [User Authentication Settings] - [User Registration].
2
Select the number button of the user that will use the IC card, and press [Edit]. For details about how to register a user, refer to User Registration in Machine Authentication.
Here, the IC card is registered to "User1".
3
Press [Register Authentication Information].
4
Press [Edit].
5
Place the IC card on Authentication Unit AU-201S and press [OK].
The [Card Authentication] display changes from [Not Registered] to [Registered].
Authenticating
1
Press [Auth. Device] when you want to use the system, and hold your IC card over the device.
in the upper-right of a page, it turns into 
and is registered as a bookmark.