Scanned data is stored directly (root) in the USB flash drive and a file name is given as shown below.
When manually entered:
Entered file name +_+5-digit sequence number (c)+. Extension
When automatically assigned (if you do not enter a file name):
Character string (a) + 4-digit date + 4-digit time + 3-digit sequence number (b) + _ + 5-digit sequence number (c) + .extension
Character String (a)
This is a character string set in advance with [Controller].
3-digit sequence number (b)
Represents the job separator.
Numbered from 0 in sequence when different data is scanned at the same time.
5-digit sequence number (c)
Represents the order of the data.
Numbered from 1 in sequence when scanned in split format.